AMS performance enters the Mercedes World: An Introduction

[AMS_Performance]

First and foremost thank you for taking the time out to read this. AMS Performance is a forced induction specialist that opened its doors a little over 10 years ago. In that time we have made major advancements and developments in the forced induction field. Some of our more recent endeavors include the ALPHA GT-R performance packages www.alphagtr.com where we have pioneered several parts, packages and even broken a few records along the way. Below are some videos of ALPHA GT-R's in action Worlds Quickest and Fastest R35 GT-R. AMS ALPHA 12 <iframe width="560" height="315" src="http://www.youtube.com/embed/FnpMe_8qvKI" frameborder="0" allowfullscreen></iframe> Worlds fastest standing mile GT-R http://youtu.be/15fBLAS2P64 First 9 second pump gas GT-R http://youtu.be/bapuJYBRCIk Enough with the GT-R though. The purpose of this thread is to announce our entrance into the Mercedes world. Just recently we picked up a new 2012 E63 AMG: For those unfamiliar with AMS and what we do please allow me to give you a brief breakdown. Unlike other tuning shops AMS is full service tuning facility and Part manufacturer. Just about every part that bears the AMS or ALPHA name is made right here in house at AMS. Shop Tour Video: http://youtu.be/K_tqa0CaOM0 We have a team of 30 highly skilled industry professionals. The best of the best in the industry! Our in house engineering department is state of the art. We have the equipment to go from concept to design to finished part all inside these walls. Below is sample of our GT-R turbo kit during the design process: From Cad design using our CMM Arm To Rapid prototype using our 3D printer: To first casted samples: And finally to finished product: We pride ourselves on OEM quality, fit and finish. We believe a product should fit just as well or better than the stock component you are taking off...after all if you are upgrading shouldn't you upgrade ALL attributes of the component. AMS Engineering Video: http://youtu.be/MU1od1_kx5g When it comes to tuning we have you covered too. We not only offer tuning solutions for just about every car but we also do it all under our roof. We have two full time calibration specialists and two AWD dyno's allowing us to accommodate just about any customers need. We really are a ONE stop shop for ANY of your performance needs. So please stay tuned as we start developing performance packages for the 5.5L Twin Turbo Mercedes platforms and others. Thank you again for taking the time to read and for considering AMS Performance. Eric

To remove this ad, register today or login if you already are registered!

[togaclk55]

Can't wait to see what you guys come up with!

[gofisch]

Do you guys have anything for us NA guys?

[AMS_Performance]

Originally Posted by togaclk55

Can't wait to see what you guys come up with!

We are surely excited to move work with the platform.

Originally Posted by gofisch

Do you guys have anything for us NA guys?

tuning wise for sure, but as far as AMS products not too sure at this time

[elijah]

Im also on the NAGTR forum and been following you guys for a while now.
Hear only good things about AMS

[AMS_Performance]

always good to hear

Thanks

[AMS_Performance]

We actually just put our E63 on one of our dynos (Dynojet) and it put down a very impressive 460whp.



Our car is a non performance pack car (we can take care of that) and it does indeed have the factory LSD.

I will keep you posted. We are still developing the GT-R, R8 and 997 so our guys are pretty busy back there but the Mercedes will get plenty of attention.

As far as tuning currently we do all our tuning in house... and I do mean in house. We spent a LOT of money and time to be able to do all software reprogramming right inside these walls. So when you buy an AMS tune you are not getting another tune resold with some other companies name on it. This is a tune written in house by the same guys responsible for writing the files for 1500hp cars.

Thank you again for the VERY warm welcome!

[Evolved8]

Positive rep from the Evo world!!!!! AMS is a very very good shop guys. I see lots of good things coming from them!!

Here is my Evo:

[GRAFH]

Dope! I was wondering when the owner was going to buy a merc and jump from mitsus, nissans to Mercs.

[prodigymb]

cant wait to see what AMS does with the 5.5TT - finally a real big tuner with software and hardware capabilities here. thought this day would never come...

[AMS_Performance]

Originally Posted by GRAFH

Dope! I was wondering when the owner was going to buy a merc and jump from mitsus, nissans to Mercs.

We are not jumping from our GT-R or Mitsu at all but just looking to move forward with other platforms. This will be the Merc as we all know as well as our 997 TT line.

Originally Posted by prodigymb

cant wait to see what AMS does with the 5.5TT - finally a real big tuner with software and hardware capabilities here. thought this day would never come...

We look forward to it as well

Thanks

[GRAFH]

No I meant progressing. Progressing through the owner actually owning the vehicles. Like porsche and merc.

[AMS_Performance]

Originally Posted by GRAFH

No I meant progressing. Progressing through the owner actually owning the vehicles. Like porsche and merc.

I figured that's what you meant, but worked with it

[AMG3.2]

oh wow, I have not one doubt you guys will make superb products for Mercs. The AMS Alpha is killer.

I love watching the videos against Underground Racing's TT Gallardos. You guys did hold the record for 60-130 for a while right?

[AMS_Performance]

Originally Posted by AMG3.2

oh wow, I have not one doubt you guys will make superb products for Mercs. The AMS Alpha is killer.

I love watching the videos against Underground Racing's TT Gallardos. You guys did hold the record for 60-130 for a while right?

We did work hard on the Alpha packages and do appreciate the kind words.

yes we did hold the 60-130 record for a time as well

http://blog.amsperformance.com/2011/...8-second-gt-r/

[AMG3.2]

Originally Posted by AMS_Performance

We did work hard on the Alpha packages and do appreciate the kind words.

yes we did hold the 60-130 record for a time as well

http://blog.amsperformance.com/2011/...8-second-gt-r/

[Knightmare69]

I hope you guys look into tuning for CGi models.

[bekurt]

Man, that 3D printer looks fascinating. I love how technologically advance the entire R&D process is. Please post more pictures if you have!

[SALES@RSWORX]

+1 for AMS coming into the scene. Nothing but top notch product from these guys !

[b16]

Awesome! Very familiar with you guys from my Evo time.

Now, please make some stuff for us 6.2L N/A guys!!

[AMS_Performance]

thanks everyone for the kind works

We are working on our final tuning on the car and hope to have some before and after dyno and drag strip testing results to post soon.

[wasted]

Can't wait to see what you Guys come up with. Will you be Supporting all AMG or just select models?

[AMS_Performance]

We can support most AMG models for tuning. The 5.5 BiTurbo will be our main focus for product development.

thanks
Larry

[wasted]

Great! Do you guys have a Place in the Southern California area?

[AMS_Performance]

Originally Posted by wasted

Great! Do you guys have a Place in the Southern California area?

PM sent