aftermarket M271 CGI boost diverter?
#1
Member
Thread Starter
Join Date: Jul 2014
Location: Canberra, Australia
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
W204 MY10 C200CGI
aftermarket M271 CGI boost diverter?
Has anyone had experience with fitting an after market diverter valve and/or BOV?
I have been talking to a lot of guys who have chipped turbo engines and they all say the same thing - replace the diverter because it will fail if you run a chip.
I have been searching around online but no one seems to make one for our M271 turbos. The only thing I have found is this you tube clip (although I think most everything in the turbo set up is after market):
I have been talking to a lot of guys who have chipped turbo engines and they all say the same thing - replace the diverter because it will fail if you run a chip.
I have been searching around online but no one seems to make one for our M271 turbos. The only thing I have found is this you tube clip (although I think most everything in the turbo set up is after market):