gauge problems

Martinstree · 10-27-2010, 11:04 PM

hey guys new to the forum and looking for some help. i've lost all my guages on my 92 300se. and ideas? i have gauge lights but no response to gas, speedo or tach. etc thanks for any ideas...

To remove this ad, register today or login if you already are registered!

s420perth · 10-28-2010, 10:12 PM

Dash board lights. Fixed asr light, fixed abs light, fixed speedometer, fixed heavy steering, fixed radio, fixed vacuum gauge. This was all fixed by replacing one 10 amp fuse in the cpu / control module box on the left side of the engine bay. I took the cover off and found four 10 amp fuses, one was blown. The problem began with a jump start gone wrong. The terminals had been reversed causing the short. Even though the engine still ran well, I had all these other problems. They're now all gone. Joy.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

10-28-2010, 10:12 PM	#2
s420perth Newbie Garage is empty, add now Join Date: Apr 2007 Posts: 9 Drives: w140 s420	Dash board lights. Fixed asr light, fixed abs light, fixed speedometer, fixed heavy steering, fixed radio, fixed vacuum gauge. This was all fixed by replacing one 10 amp fuse in the cpu / control module box on the left side of the engine bay. I took the cover off and found four 10 amp fuses, one was blown. The problem began with a jump start gone wrong. The terminals had been reversed causing the short. Even though the engine still ran well, I had all these other problems. They're now all gone. Joy.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)