76 300d W115 Combination Swtich

300d 4 ME · 01-06-2011, 10:13 PM

Alright, I have a bad tun signal/combination switch on this 76 300d w115.
Will a switch off of any other models/body styles fit? W123,etc

Its not possible to rebuild one of these, is it? The signal won't stay on/hold on.

To remove this ad, register today or login if you already are registered!

Raptelan · 05-24-2011, 09:00 PM

(you posted in the wrong section, this is W116!)

Yes, it's possible to repair. I had the same issue in my 1976 240D 3.0L W115. I had a shop do it (quite cheap) but basically there are just some little things inside that need sharpened a bit and you're good to go. It's probably not hard to look up but I don't have any further information about it - sorry.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

05-24-2011, 09:00 PM	#2
Raptelan Newbie Garage is empty, add now Join Date: Jul 2010 Posts: 14 Drives: 1980 300SD	(you posted in the wrong section, this is W116!) Yes, it's possible to repair. I had the same issue in my 1976 240D 3.0L W115. I had a shop do it (quite cheap) but basically there are just some little things inside that need sharpened a bit and you're good to go. It's probably not hard to look up but I don't have any further information about it - sorry.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)