another BAS ASR P1580
#1
Newbie
Thread Starter
Join Date: May 2016
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
mercedes s500 1999
another BAS ASR P1580
I searched the forum could not find answer yet, here is my problem, 99 s500
for about 3 weeks now every morning when I start the car I get BAS ASR light, car in limp mode shaking real bad rpm around 1300.and I get p 1580 code, after few minutes and after turning engine off and on few times its back to normal, and it stays fine all day long, I cleaned the throttle body the wires are fine the brake lights work fine , any idea? help Thanks
for about 3 weeks now every morning when I start the car I get BAS ASR light, car in limp mode shaking real bad rpm around 1300.and I get p 1580 code, after few minutes and after turning engine off and on few times its back to normal, and it stays fine all day long, I cleaned the throttle body the wires are fine the brake lights work fine , any idea? help Thanks
#3
Junior Member
Join Date: Jul 2016
Location: Palm Springs, CA
Posts: 24
Received 0 Likes
on
0 Posts
1997 CL600
ohkmd, good luck! I had a CE320 that had a similar problem. I would back it out of the garage drive about 100- feet up the street, bang "limp home". I'd pull over stop and restart the car and never have the problem again until the next morning. Tried every suggestion under the sun, had the ETA rebuilt, new wiring, new speed sensors, etc. You name it, we tried it. Finally sold the car to my mechanic who is still driving it with the same problem. A real mystery.
Anziani
'97 CL600
Anziani
'97 CL600