S430 brake light
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
2002 S-430
S430 brake light
Does anyone know where I can find an LED plate for my left tail light? I can't find anything other than whole light modules and I'm pretty sure that the problem is only in the plate. The brake light is intermittent and not all of the LEDs light up when it is on.
#2
MBWorld Fanatic!
"Not being hampered by facts, I can discuss the subject freely..."
Do you think that you could resolder all of the connections on the plate?
Do you think that you could resolder all of the connections on the plate?
#3
Member
Join Date: Nov 2012
Location: New England
Posts: 220
Likes: 0
Received 2 Likes
on
2 Posts
2006 S430 4Matic
Being a solid state device LED's will last longer than the car. I agree with Wally that you should check the solder connections and look for breaks (cracks) in the lands (wires) on the printed circuit board. Be careful that you do not burn these connections when you re-solder them. Use a soldering iron made for printed circuit boards (Low Wattage) and a thin gauge solder so you don't put too much on and end up creating short circuits. Your local electronics hobby store will have this stuff.