New product, headers for E550
#1
Former Vendor of MBWorld
Thread Starter
New product, headers for E550
We just came out with shorty headers for the M273 engine, they are stainless steal and direct bolt in with no modification. On sale for only $369
The following users liked this post:
4jaay (11-19-2023)
#3
Former Vendor of MBWorld
Thread Starter
More HP. I havent had a chance to do an dyno pull since install to give factual numbers. But you can feel a difference from 5k rpm and above. And playing with cars we normally play with that have made a difference.
#4
hmmmmmm????
#6
Can you post closer pics of welds?
The following users liked this post:
210jake (09-16-2020)
The following users liked this post:
a100steaksauce (07-25-2016)
#10
Former Vendor of MBWorld
Thread Starter
There wasnt much interest in long tubes for this engine also, with shorties they fit allot more applications then having to come out with 8 different pairs of long tubes.
lifetime warranty against defects.
lifetime warranty against defects.
#11
MBWorld Fanatic!
shorties produce little to no sound difference and at 5k rpm (wot) don't produce same power gains as long tubes. AM i correct or nah?
#12
Former Vendor of MBWorld
Thread Starter
you are correct , long tubes are better, But to find them for this application is rare, then you have to figure out what you are doing about cats. And the price difference isnt the same ball park.
These are an upgrade over the stock that do produce more power and for the price for more hp on a mercedes they are a bargain.
These are an upgrade over the stock that do produce more power and for the price for more hp on a mercedes they are a bargain.
#13
#14
Former Vendor of MBWorld
Thread Starter
i do agree long tubes are better. But then you have the issue of cats, you have to replace the rest of the exhaust and time to install them is much more.
#17
Former Vendor of MBWorld
Thread Starter
#18
MBWorld Fanatic!
This is a typo correct? Do you have actual values on a graph? IF this is true, why isn't everyone running shorties across all engine plants if they do IN fact produce 14 hp? Just asking questions, not being condescending...
#19
Former Vendor of MBWorld
Thread Starter
i'll ask the mfg for a copy of the graph. They did the dyno on them.
#20
Member
#21
Former Vendor of MBWorld
Thread Starter
heard back from manufacturer, I have to apologize those numbers were from slk headers. They have not dyno's the 550 headers.
We have installed them on clk550 and there is a noticeable difference.
We have installed them on clk550 and there is a noticeable difference.
#22
Former Vendor of MBWorld
Thread Starter
I just found out that Eurocharged is also a dealer for them, they install them for their customers who are looking for a more cost effective alternative to their headers.