Adi-Benz

Let's talk about random car products we find on the internet!

Can be either serious or funny.

I'll start;

I want to turn my c300 into a c63 amg black soo, I found this wing:


http://www.ebay.com/itm/New-17cm-Min...pXedOm&vxp=mtr

10/10 willing to buy, carbon fiber and cheap, the grip I get from this, whoa, I can't even begin to explain...

Adi-Benz

If you notice, its made *specifically* for our Benz's.

Adi-Benz

Saw these, they look decent.

Not sure if I'd be willing to put them on mine though.



https://www.amazon.com/MATCC-Chrome-...WATEJJMEEYGF5Q

Josh.A.Hussey

I like the idea of the covers! But I don't think it would match anything inside the PFL models.

Atlas Grey

I put them on mine. Got the brushed ones. Looks way better than the black plastic ones. Takes 37 seconds to put them on 45 seconds if you are slow

xEryx

Looks great on facelift. Only matches door handle on prefacelift.

xEryx

Also waiting on these for my door. Should match even better.

xEryx

Getting one of these in white as well.

Adi-Benz

I would only put the silver caps on if I wrapped my trim in carbon fiber. They definitely don't match the wood xD
My worry too is that they will "feel" cheap...

As for the step lights, where are you buying them? Link?

They look pretty cool and there is a diy on here for them too.

Atlas Grey

They don't make them for the coupe

Adi-Benz

It's a lot easier than wrapping!

Remember to include product links so we dont have to ask! :S

Atlas Grey

I am going to give these a whirl and report back


http://www.ebay.com/itm/182067921498?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Adi-Benz

Looks good! Too bad I don't have paddle shifters :P

Josh.A.Hussey

I knoowwwww I wanna get paddles bad... No good for traffic but great for messing around!!

Atlas Grey

BTW I got an email from the extensions above, they can be had in either the brushed finish or in Black

xEryx

http://www.ebay.com/itm/2x-LED-Moving-Front-Door-Sill-Scuff-Plate-Pedal-For-Benz-ML-Class-W166-2012-2015/371689408243?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D38618%26meid%3D8b61d7e725af4be7ba2cb69f83588b95%26pid%3D100005%26rk%3D1%26rkt%3D6%26sd%3D182174022331
http://www.ebay.com/itm/322163900967?_trksid=p2057872.m2749.l2648&ssPageName=STRK%3AMEBIDX%3AIT

Adi-Benz

Ya know everything is *just a bit* more expensive than I expect lol

#livingthebenzlife

Atlas Grey

Adi,
I have the wood trim. The brushed aluminum seat caps actually match my door handle perfectly so it's not out of place with the wood. Wish I had the aluminum trim

Adi-Benz

Well I'm looking into doing the carbon fiber trim anyway. Thank you for your response though, I can see it working now.

Josh.A.Hussey

Atlas,

xEryx I believe just wrapped all his trim in brushed aluminium style vinyl... Looks VERY nice... On a previous thread somewhere, I will see if I can dig it up!

Adi-Benz

Remember to go to the top of the thread and rate it 5 stars so it is official [looking, haha]!

Adi-Benz

Found this wrap:



Not sure if its a good deal, but the quality and reviews seem good. Can also find gloss black/other CF colors.

https://www.amazon.com/gp/product/B0...92WJRYRFBZH9IS

xEryx

You should buy at least 5ft x 6ft for first timer. I used almost the whole roll dealing with rewraps, scratches, etc.

Adi-Benz

Have you used this specific product, 3M, or other brand?

It seems that quality wise this and 3M are the same, but 3M lasts longer and is more expensive.

I'd also consider doing a roof wrap, but I can barely put on an iphone screen protector without getting bubbles, so idk if I'm quite ready for that yet.

xEryx

I have not, but 3M is definitely the best and a must if you are looking to get years out of the project. Honestly Roof would be so easy because you don't have to hold the roof and the wrap like you do with the trim. While wrapping trims by yourself you only have two hand to do a 3-4 hand job so you have to compromise and lay the wrap without having a good grip on the trim.