The #$%^#& front end clunking sound.
#1
Senior Member
Thread Starter
The #$%^#& front end clunking sound.
I have read many threads about the "clunk" sound from the front end. I have it, from the front passenger wheel well, usually at slower speeds, and its driving me insane.
My 2012 GL450 is a CPO car, and I am hell bent on them solving this problem before the upcoming expiration of the CPO coverage.
Can you wise folks please share any and all thoughts on what I want to insist they check at the next service to try to solve the problem. I want to make a list for my service advisor.
From the threads, the list I have is:
1. Sway bar/anti-roll bar end links
2. control arm bushings (is this same as "front bushings"?)
3. Right front knuckle
4. CV shaft
Anything I am missing?
My 2012 GL450 is a CPO car, and I am hell bent on them solving this problem before the upcoming expiration of the CPO coverage.
Can you wise folks please share any and all thoughts on what I want to insist they check at the next service to try to solve the problem. I want to make a list for my service advisor.
From the threads, the list I have is:
1. Sway bar/anti-roll bar end links
2. control arm bushings (is this same as "front bushings"?)
3. Right front knuckle
4. CV shaft
Anything I am missing?
#3
MBWorld Fanatic!
Join Date: Jun 2010
Location: Emmett, ID, USA
Posts: 2,579
Received 573 Likes
on
482 Posts
2007 GL450
I have read many threads about the "clunk" sound from the front end. I have it, from the front passenger wheel well, usually at slower speeds, and its driving me insane.
My 2012 GL450 is a CPO car, and I am hell bent on them solving this problem before the upcoming expiration of the CPO coverage.
Can you wise folks please share any and all thoughts on what I want to insist they check at the next service to try to solve the problem. I want to make a list for my service advisor.
From the threads, the list I have is:
1. Sway bar/anti-roll bar end links
2. control arm bushings (is this same as "front bushings"?)
3. Right front knuckle
4. CV shaft
Anything I am missing?
My 2012 GL450 is a CPO car, and I am hell bent on them solving this problem before the upcoming expiration of the CPO coverage.
Can you wise folks please share any and all thoughts on what I want to insist they check at the next service to try to solve the problem. I want to make a list for my service advisor.
From the threads, the list I have is:
1. Sway bar/anti-roll bar end links
2. control arm bushings (is this same as "front bushings"?)
3. Right front knuckle
4. CV shaft
Anything I am missing?
Will it fix it? Entirely? Hell no. At least, if it does, I'll sing many songs.
The following users liked this post:
eric_in_sd (12-03-2016)