2015 C400 BMS Tuned - New PB! Quarter Mile
10-27-2016, 09:15 AM
#1
Member
Thread Starter
2015 C400 BMS Tuned - New PB! Quarter Mile
2015 C400 4Matic - AMG Package.
Englishtown NJ , Raceway Park
My 3 Runs..
PB: 12.689 @ 109.98
12.81 @ 109.45
12.717 @ 109.97
Englishtown NJ , Raceway Park
My 3 Runs..
PB: 12.689 @ 109.98
12.81 @ 109.45
12.717 @ 109.97
10-27-2016, 09:27 PM
#5
Without sounding rude, why not get flashed by OE or AMR or any of the guys putting down big numbers on C400? There is a guy with an OE flash on a C400 who did 105mph on the track stock, followed by a 116 after the flash...
10-28-2016, 08:57 AM
#6
Member
Thread Starter
My Tune is $300 vs $2000.
I'm also running Pump Gas and no other modifications.
Where is their link for the run?
10-28-2016, 10:54 AM
#7
Just search uptownman and you can see his thread with the actual slip...
I'm not trying to be disrespectful so don't get upset but these plug and play solutions are well and good, I'd rather just get my nut than get blue-balled...
cheers
I'm not trying to be disrespectful so don't get upset but these plug and play solutions are well and good, I'd rather just get my nut than get blue-balled...
cheers
Trending Topics
10-28-2016, 11:14 AM
#8
Member
Thread Starter
I agree No Disrespect, OE is a better tune.
$300 got me 12.6 @ 109 Plug & Play I can remove at anytime will not void warranty.
$1195 + $200 Flashloader gets you 12.2 @ 116 ECU tune can be traced on vehicle.
--Extra $1095 gets you .4 tenths and 7mph.
--Costs $273.75 per tenth or $156.42 per mile per hour.
I just choose to have a Plug and Play knowing it slower. I think both products are great for the price. You get what you pay for as they say.
Plus this is my DD I have a 2016 Dodge Viper TA 2.0 w/ Tune & headers - this is my full blown nut in your face no blue ballin
10-28-2016, 01:05 PM
#9
Ayeee!!! That viper looks good.
Clearly, money's not an issue, get the OE flash and thank me later. Daily Driving 450 hp with all wheel drive means traction in all conditions and loads of fun.
Apparently, the tune will only be dectected if MB pulls the ECU and sends it to Germany. According to Cajun, a c450 member on here, that's what allows him to get away with sin while still taking the car to the stearlership for maintenance work, oops I meant dealership.
Clearly, money's not an issue, get the OE flash and thank me later. Daily Driving 450 hp with all wheel drive means traction in all conditions and loads of fun.
Apparently, the tune will only be dectected if MB pulls the ECU and sends it to Germany. According to Cajun, a c450 member on here, that's what allows him to get away with sin while still taking the car to the stearlership for maintenance work, oops I meant dealership.
The following users liked this post:
JoeyB Benz (10-28-2016)
10-28-2016, 01:35 PM
#10
Member
Thread Starter
Ayeee!!! That viper looks good.
Clearly, money's not an issue, get the OE flash and thank me later. Daily Driving 450 hp with all wheel drive means traction in all conditions and loads of fun.
Apparently, the tune will only be dectected if MB pulls the ECU and sends it to Germany. According to Cajun, a c450 member on here, that's what allows him to get away with sin while still taking the car to the stearlership for maintenance work, oops I meant dealership.
Clearly, money's not an issue, get the OE flash and thank me later. Daily Driving 450 hp with all wheel drive means traction in all conditions and loads of fun.
Apparently, the tune will only be dectected if MB pulls the ECU and sends it to Germany. According to Cajun, a c450 member on here, that's what allows him to get away with sin while still taking the car to the stearlership for maintenance work, oops I meant dealership.
Yea ill have to check into that! Thanks!
11-25-2016, 02:05 PM
#12
Junior Member
Join Date: Dec 2014
Location: Calgary, Alberta
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
2015 C400
Having owned a C400 with the BMS tune, I can vouch that the performance was night and day, especially at that price point. I'm selling my tuner box not that I've sold my car.
https://mbworld.org/forums/engine-pe...ml#post6975321
https://mbworld.org/forums/engine-pe...ml#post6975321
