Diecel

Back again with a new question here, so, I just realized one of the exhaust tips on my W212 facelift has become a little bit loose for some reason. When pushing it upward from the inner side it goes up and when releasing it goes back down about like an inch or so. The other exhaust tip doesn't even allow me to push it upward at all.

Somebody who has disassembled or replaced their facelift exhaust tips, how are the exhaust tips exactly attached to the rear bumper? Am I missing a screw or a bolt on the other exhaust tip or what? It's not like the tip is going to fall off, it just feels like it's not properly attached right now. Anyhoo, help would be appreciated.

belarus27

Its held with 3 screws on pre face lifted w212s....
im pretty sure it should be pretty similar with facelift

Diecel

What kind of screws are they? It sounds like I am missing 1 out of 3 if the attachment of the exhaust tip in the facelift and pre-facelift is the same. The tips have a different appearance in the facelift though.

belarus27

Dont remember exactly but these look like the ones but 3 of them

Diecel

Hmm, gonna have to investigate it a little bit.