SL/R230: Stalling issue after CPS replacement
08-10-2014, 03:22 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2012
Location: Central, IL
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
SL500
Stalling issue after CPS replacement
I had an issue with stalling and then a crank but no start so I did some research and learned the usual culprit is the Crankshaft Position Sensor. So I picked up a new one and put it in. It fixed the crank no start issue but now I can't rev past 2000 rpm without stalling. The car starts right up every time now but still throwing P0335 code after CPS replacement. What is causing my stalling?
