aleksandar1099

I purchased an authentic German star system from a seller local here in Chicago, but I have seen a lot of people have good luck with the system off of ebay...

theeddie

thats what im hoping. just so many options, can anyone refer me to a kit on ebay?

BlackCard

Or see below.

mikeevo

Where are you located in Texas. I am looking at getting one of these and could adjust your options Cheap. I am up near Tyler TX.

NSX2NV

Anyone close to Springfield Missouri that would be willing to do some mods? I'd be willing to drive somewhere if they would be willing to help

mikeevo

can someone show or list the info , for the 93 octane table set. what every happen to the guy who as showing the german screen. to turn off speed limiter and the other options he listed.

Thanks knowledge is power.

theeddie

anyone found the flash on hard braking? or the fog light mod?

Road Racer

I got it from ebay, and works excellent.

Im still waiting to know how to remove the anoying "dont forget key" chime when you open/close the door.

anyone?

theeddie

mines already removed "i didnt do it"
but id like to know how you do it

theeddie

any one have Developer keygen

theeddie

nevermind i have a the keygen now

mikeevo

ok theeddie
fill us in on all the good info.

theeddie

ive have figured out the add many gallons are left in tank so far.

ill work on more tomorrow. but without knowing German its tough

Jud Chapin

This question was asked before but I don't see an answer. Can you just purchase the Star software and use your own laptop?

mikeevo

yes , its usually , hardrive/software with lots of cables and a box to hook everything together .

Jud Chapin

Thanks!

rluvsbenz

Can you share Developer Keygen?

theeddie

shoot me a pm

aleksandar1099

Thank you for the help! I will post up more star mods as I come across them!

Bramage

Have any of you performed the lowering via Star in your garage, and if so, did you get an alignment immediatly?

I see the "correct" way in on an alignment rack, however I am guessing there are more than a few DIY guys here..

jazz5000

I did the usa stye with buzzer mod yesterday to my uk w211 e220 2006
it makes the beeps as it should but it is very quiet. You can hardly hear it.

Is everyones like this?


also for the power fold mirrors on remote lock

My mechanic got to left door control module
and then it said someething along the lines of auto mirror dim and fold on parking. it said not fitted, and im sure all you had to do was change it to fitted but my mechanic says he is not going to take the risk..
Can anyone confirm how to do this mod.

Thanks
Jazz

dvb247

I'm blown away, I fancy some of these little mods, vim, 155 limiter removal, lock/unlock beeps, need a man that can with a Star system in Cheshire, England

reitmeid

If you back one screen out, you should see a volume percent. Mine was only 20 after I changed to usa buzzer. I set it at 40 and it's just about right.

AgSilver

If you want a complete DAS with fantastic support, get it direct from the source http://ecartool.com/

They include EVERYTHING from multiplexers to all cables for all models. This is the real deal!. It comes from Taiwan. The wiz-kids have cracked all the DB security and if you have a problem they will correct it online with TeamViewer. Just don't mess with the system as it is very sensitive to MS updates and stuff and don't add additional software like Firefox or JAVA. DB actually uses a modifided XP OS and if it ain't right it shuts down DAS.

reitmeid

Support is the key word. I bought a cheap ($580 shipped) system with multiplexer, all cables, and ibm preloaded T30 harddrive. XP came up nicely and added a few native system drivers and then, my DAS wouldn't load becase the version was dated. Got around this problem by backdating computer time. Next problem - no communication with car- was tougher (dreaded Cal 872 error). Could have bought solution from John at JCRecording for $40 but plugged away at Digital Kaos until I found the solution between the lines of some posts--change 1 lousy line in the Das/bin/cal.ini file. Only then did I have a working system. Then I ran the Ceasar test and had 1 anomaly--3100 can error. Heard around that this is a hardware error most often. Took apart multiplexer and put her under the scope. Surface mount chips were hand soldered--but not too bad. Found a few instances of smd resistors with one end tilted and some very cold looking solder joint in some of the edge connector pins. Now it's 100 % and I have to say..what a great tool!!! but expect some difficulties unless your luck is better than mine. Oh, and support from vendor??? Ha, Ha, within hours of the end of the e-bay auction, all traces of the transaction had vanished. And e-mails to him? He and his engineers are "studying the problem and will have a solution soon" Ha ha.