AZN Optics 194 LEDs for W211
#28
Super Moderator
You're right. The prices posted are for LED parking lights. 5000K for if you want a white light and 8000K if you want the light a little more blue. He does NOT sell bi-xenon bulbs. Hope Mike doesn't mind me asking for him.
#31
SPONSOR/MBworld Guru
Thread Starter
Will be shipped out tomorrow morning
#32
MBWorld Fanatic!
Join Date: Jul 2004
Location: Seattle, WA
Posts: 4,330
Likes: 0
Received 0 Likes
on
0 Posts
'09 911 C4S
Installed the same set of LEDs in my Parking Lights just now coz the other set that I had burned out. I got the 5K set and they match my PIAA 6000K pretty well. I like it
#34
SPONSOR/MBworld Guru
Thread Starter
yes, although when I say blue, don't expect like blue blue. 5000K is more of a pure white, while 8000K is often described as a cool/glacier white. From up close, it looks white, but as you go further away, you can see a slight bluish tint to the light. Of course, everyone perceives color spectrum differently so some with more sensitive eyes will be able to easily discern the bluish tint closer than others.
#36
MBWorld Fanatic!
PIA to install on E63
I just got the bulbs yesterday and I spent half an hr trying to figured out how to remove the stock one. These light bulbs are a PIA to install on E63..I don't see anyway to install them without removing the headlights..I'm not even going to try it. Sighs.......
#37
SPONSOR/MBworld Guru
Thread Starter
Light housing should be the same between E63 and E55 no? If so, the E55 I saw they were able to remove the connector without taking out the headlight.
#38
MBWorld Fanatic!
thats ok..i have other use for it.
#39
MBWorld Fanatic!
Join Date: Dec 2008
Posts: 7,226
Likes: 0
Received 6 Likes
on
5 Posts
3-five-five/ TUNDRA/ 07 997 cab
Got my 2 city lights. One works and looks awsome. The other one just flashes one time every few seconds. I tried it in both sockets and both ways. No workie. Can I get a new one please. I will sent this one back if you want to inspect it.
Oh and can I get a price for an entire interior kit.
Oh and can I get a price for an entire interior kit.
Last edited by emoving; 11-18-2010 at 04:29 PM.
#41
SPONSOR/MBworld Guru
Thread Starter
Got my 2 city lights. One works and looks awsome. The other one just flashes one time every few seconds. I tried it in both sockets and both ways. No workie. Can I get a new one please. I will sent this one back if you want to inspect it.
Oh and can I get a price for an entire interior kit.
Oh and can I get a price for an entire interior kit.
Got it and shipped
#44
SPONSOR/MBworld Guru
Thread Starter
Currently only offering 194 LEDs to the MB world, but turn signals should be out soon and then I'll be offering festoons.
#46
Super Member
Great product and and super fast shipping
However i had a similar issue as emoving- put them on and would stay on unless you tapped them so i decided to check the other one on the same socket and worked just fine so when i looked closely i saw a loose piece on it then came off completely so had to solder it to make it work..didnt have the time to install them both yet but im hoping they'll hold..
If is not a problem to send me another one i would really appreciate it to avoid this thing taking a dump on me again.. Thanks again
However i had a similar issue as emoving- put them on and would stay on unless you tapped them so i decided to check the other one on the same socket and worked just fine so when i looked closely i saw a loose piece on it then came off completely so had to solder it to make it work..didnt have the time to install them both yet but im hoping they'll hold..
If is not a problem to send me another one i would really appreciate it to avoid this thing taking a dump on me again.. Thanks again
#47
MBWorld Fanatic!
Join Date: Dec 2008
Posts: 7,226
Likes: 0
Received 6 Likes
on
5 Posts
3-five-five/ TUNDRA/ 07 997 cab
Great product and and super fast shipping
However i had a similar issue as emoving- put them on and would stay on unless you tapped them so i decided to check the other one on the same socket and worked just fine so when i looked closely i saw a loose piece on it then came off completely so had to solder it to make it work..didnt have the time to install them both yet but im hoping they'll hold..
If is not a problem to send me another one i would really appreciate it to avoid this thing taking a dump on me again.. Thanks again
However i had a similar issue as emoving- put them on and would stay on unless you tapped them so i decided to check the other one on the same socket and worked just fine so when i looked closely i saw a loose piece on it then came off completely so had to solder it to make it work..didnt have the time to install them both yet but im hoping they'll hold..
If is not a problem to send me another one i would really appreciate it to avoid this thing taking a dump on me again.. Thanks again
#48
Super Member
#49
SPONSOR/MBworld Guru
Thread Starter
Great product and and super fast shipping
However i had a similar issue as emoving- put them on and would stay on unless you tapped them so i decided to check the other one on the same socket and worked just fine so when i looked closely i saw a loose piece on it then came off completely so had to solder it to make it work..didnt have the time to install them both yet but im hoping they'll hold..
If is not a problem to send me another one i would really appreciate it to avoid this thing taking a dump on me again.. Thanks again
However i had a similar issue as emoving- put them on and would stay on unless you tapped them so i decided to check the other one on the same socket and worked just fine so when i looked closely i saw a loose piece on it then came off completely so had to solder it to make it work..didnt have the time to install them both yet but im hoping they'll hold..
If is not a problem to send me another one i would really appreciate it to avoid this thing taking a dump on me again.. Thanks again