Installing 82mm TB y pipe
10-25-2014, 02:08 PM
#1
MBWorld Fanatic!
Thread Starter
Installing 82mm TB y pipe
OK so dumb question, but can anyone show me a pic on how the 82mm rubber y pipe is installed? I tried all evening yesterday and could not get it on. Either the gasket slips past the rubber tube onto the TB or won't get on if it's securely held in place in the rubber piping.
10-26-2014, 01:13 AM
#2
Senior Member
Same here, could never get it properly seated. Tried everything, right now I have it wrapped with gorilla tape, thinking about going with a custom intake setup with a silicon hose and clamps on the 82mm TB.
10-27-2014, 06:53 AM
#3
MBWorld Fanatic!
Thread Starter
Is there a metal ring in your rubber gasket? I feel like there should be one in mine.
Background story, shop did my headers replacement. Intake popped off before I even got home. Never had that issue when Eurocharged installed the 82mm TB a year or so ago. Now I cannot reinstall it back on. Either the shop lost actual gasket or they lost the metal ring that goes round it (if there is one)
Background story, shop did my headers replacement. Intake popped off before I even got home. Never had that issue when Eurocharged installed the 82mm TB a year or so ago. Now I cannot reinstall it back on. Either the shop lost actual gasket or they lost the metal ring that goes round it (if there is one)
