NickE63

eurocharged tune,
mbh downpipes, no retune after install
kn slip ins
93 octane

damn hot inside the dyno booth, i think it would of helped but there telling me nope!

first pull they told me it did 618whp and 802lbs don't have that graph to scan they didnt print the ****ing thing..*******s

Vic55

Solid numbers---------------- I wonder what 93 octane would have done for my M157's? We only get 91 here in Cali.

NickE63

Thanks pal my question is what's next on the mod list. That doesn't cost an arm an leg?

NickE63

By the end of the week I'm getting a dyno on a dyno dynamics as well for a comparison

BenzoBoi

Some crazy numbers! I couldn't imagine needing any more power with those numbers.

BUT....

I'm sure I'd get used to that power sooner or later and then see what else I can upgrade. Next step would be......turbos?

vdubpower

did u ever have it tested, after the tune and before the pipes or the other way around?

AMG E Power

Possibly a larger more Efficient intercooler ? Would be a lot cheaper than bigger turbos

Faris63

Nice numbers Nick

NickE63

Ty

Zod

thanks for the post

these motors are the 55k successors no doubt..

its just sick that with 2 simple mods you would compleltly blow past most of the heavily moded 55ks

Vic55

Big Blocks with turbos rule!!!!!!

slavik

these motors really are impressive!

NickE63

Vic I gotta ask out of all your cars which is the fastest?

Vic55

The 997TT- its the fastest and quickest---- off the line its just a ferocious with awd and then because of the mods it pulls hard up to and past 160mph.

I have the PDK, tune, and exhaust. My GTR was faster but its getting retired.

NickE63

Awesome 997 was always my favorite car, and I loved my GT2. What about a roll race your cls should pull on the 997, and def if it was stock not sure with the tune etc? GTR I'd amazing but I got bored of mine rather quick.

Capn

Wow nice numbers!

NickE63

Thank you

bp95gsx

I can't wait to send my ecu to Jerry!

NickE63

From what I'm told Jerry isn't installing this aggressive of a tune anymore, he has altered it since.

dr. ss

How are these driveline s going to hold up to 700-800 lb ft of tq? Anybody break anything yet?

Also w that much tq u start 2 see blown motors. Are we gonna need to get these motors built? Forged pistons/rods etc?

NickE63

Dr.ss lets hope none of this happens until my lease is up!

Max.H

Those are some stout numbers, congrats Nick!

Rob@Strasse

Solid numbers, congrats!!

Karl901

First thing to break on drive line is rear axle shafts.
It happened to me in my CLS 63
Upgraded ones on order .

NickE63

thank you