Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**

[Don Nguyen]

As a new vendor on the forum, I am offering a special promotional deal for the first couple of Benzs who are interested in getting their roof's wrapped with some gloss/matte black or carbon fiber vinyl. (Shoot me a PM for details on pricing, as pricing is different depending on finish, specific car, etc). I've done hundreds of cars at this point. Here are just one or two quick pictures of cars that I've done recently in each type/finish, just to give you guys an idea of how it looks like and the quality of my work: Gloss black - Matte black (looks like the same car, but it's actually a different one) - 3M Di-Noc Carbon Fiber - For locals, I can supply the materials and do the entire installation at my location, for anything that you need to get done. However, if you're a non-local (or someone who just wants/needs some material) and would like to give a DIY a shot, I can sell you just the material as well. - Gloss/matte black roof vinyl (other finishes/colors are available upon request) - Carbon fiber vinyl - Black out window trim vinyl - Interior/exterior trim - Headlight/Tail light tinting - Custom cut stickers/graphics - Full car wraps - Installations - And More... Let me know if you guys have any questions or if you are interested in anything. thanks. -Don donathon@gmail.com

To remove this ad, register today or login if you already are registered!

[Don Nguyen]

3M Di-noc Carbon Fiber on the hood and center section of the bumper:











-Don

[Don Nguyen]

Tinted the tails on this 1 series + CF for his roof and mirrors:









-Don

[Don Nguyen]

Gloss black (Don't mind the blue tape, he just recently had those pieces painted and he had to take a road trip to get to where I was to get vinyl work done):











-Don

[Don Nguyen]

Some more CF on a Golf MkV GTI:













-Don

[Don Nguyen]

How about a full s2k wrapped in the 3M CF material?

Tested the curves etc a bit with some matte black first. Just did the one driver side fender and hood:















Once I got a feel for it, I went ahead and did the full CF treatment on the car. Probably one of the first cars on the east coast to have this fully done (this car was done a long time ago, but the owner's been constantly building it, so it hasn't even seen the roads yet after being fully wrapped):





















So what do you guys think? Who will you be bringing your cars to get wrapped now

-Don

[Don Nguyen]

Some pictures on a 997 GT3 that I wrapped the 3M Di-Noc CF with, on the roof and spoiler element. Let me tell you, it looked hot! Haha. The car was less than 24 hours old, off of the dealership lot.



















-Don

[Don Nguyen]

So many white cars, but I don't blame them, the black roofs do look best on white colored cars:

Gloss black -



















-Don

[Don Nguyen]

Some before and after pictures. This is the first time I've taken pictures before applying the vinyl roof, so it'll give you guys somewhat of an idea of how it looks like.

Gloss black:












-Don

[Don Nguyen]

Here's pictures of an E46 that I did the window trim in matte black, tinted the red portions of the tail lights, and did gloss black on the roof and his roof spoiler:











-Don

[scottyOTM]

How much to do they window trim on a CLS. thanks

[Don Nguyen]

Some pictures on an SL500, for those who've asked me how do I do a roof if there's no rain/roof rails:













-Don

[Don Nguyen]

Not a Mercedes or even a Euro car, but I am curious to if any of you guys would ever consider doing a matte finish on your car. Just interested in hearing/seeing some opinions on this from benz owners, since it seems more of a Subaru thing:

Matte black -















-Don

[Don Nguyen]

Installed gloss black vinyl on the window trim of this E46 M3 and tinted his tail lights.

I probably should have done a better job of cleaning the window trim before taking the pictures. There's palm/finger prints from me installing all over it, haha.













-Don

[Don Nguyen]

3M Di noc carbon fiber on an ISF:









-Don

[Don Nguyen]

Do you guys have any specific or general questions about anything? Or if you guys want me to take pictures of the cars that I do at certain angles or specific places/parts, let me know.

More of the white 350z with the vinyl wrapped gloss black roof:









-Don

[Don Nguyen]

Brand new E90 M3 that had me wrap his roof, hood vents, and mirrors in the 3M Di-noc carbon fiber vinyl:













-Don

[Don Nguyen]

Finally got my computer fixed, so finally I get to continue with the pictures again

Gloss black on a Mk6 GTI:



















-Don

[Don Nguyen]

Got some new pictures that I haven't posted up, that I'll do later today or tomorrow.

Let me know if you guys want any specific pictures/angles for me to take, before/after/etc of the vinyl on the cars, and I'll see what I can do for you.

Also, feel free to post any thoughts or feedback you might have. Always looking for new ideas to do and try out

-Don

[Don Nguyen]

Porsche Carrera that I wrapped the roof with in the 3m di noc carbon fiber:















-Don

[Don Nguyen]

Had someone request me post some pictures of blacked out window trim and misc chrome parts.

I did the window trim on this C63, along with his chrome trunk lid handle and the top half of his side mirror blinkers.

Before:





After:











-Don

donathon@gmail.com

[Don Nguyen]

Been having quite a few people ask me about interior wrappings, so here's some pictures so you guys can all see, versus me PMing people the same pictures over and over again.

Here's pictures of an E92 335's interior that I wrapped in the 3M carbon fiber di-noc vinyl material:









-Don

[wasupdu]

I just sold my '05 BMW 525 and have been a member on several BMW boards (e60.net, bimmerpost, bimmerfest, etc...) and Don Nguyen is very highly regarded on all of these forums. He's done vinyl wraps on several cars and gets top notch ratings across the board.

I think a black/carbon roof only looks good on a white vehicle personally, so I have no need....but if you're interested in a vinyl wrap contact Don and im sure he'll take care of you.

BTW, I have no affiliation with Don and in fact I've never even personally met the guy, but I have heard so many positive comments about his work and had no idea he was on this forum until I recently purchased my CLS63.

[Don Nguyen]

Originally Posted by wasupdu

I just sold my '05 BMW 525 and have been a member on several BMW boards (e60.net, bimmerpost, bimmerfest, etc...) and Don Nguyen is very highly regarded on all of these forums. He's done vinyl wraps on several cars and gets top notch ratings across the board.

I think a black/carbon roof only looks good on a white vehicle personally, so I have no need....but if you're interested in a vinyl wrap contact Don and im sure he'll take care of you.

BTW, I have no affiliation with Don and in fact I've never even personally met the guy, but I have heard so many positive comments about his work and had no idea he was on this forum until I recently purchased my CLS63.

Thank you. I actually really appreciate the feedback, cause it lets me know that I am at least doing something right.

I wish I could share these types of feedback/comments with everyone and every forum that I am on (maybe I can, once I get a site up), cause this type of stuff is what really speaks more than pictures.

I am a car enthusiast from the core, so I try to show it through my work. I understand what a fellow car enthusiasts wants/expect when they let someone else work on their car. Again, no one is perfect, there are a time or two where the stars did not line up right or I woke up on the wrong side of the bed that day. However, I definitely give it my all in each and every car that I do work on.

-Don

[Don Nguyen]

Did something different and new. Wrapped the tails of a C63 in gloss black around the border/outline of the tail lights in vinyl.

Stock tail lights:



After pictures:







-Don

donathon@gmail.com