MBTECH28

I have a set of 2013 sl550 wheels that were powder coated a custom color. Closest thing I can say is that it is Dakota brown but slightly darker and more flake.
Wheels
Fronts are 19x8.5 et 35.5 mb 2314011602
Rears are 19x9.5 et 48 mb 2314011702
Tires
Front 225 40 19 Bridgestone potenza re050a 6/32
Rears 255 35 19 Bridgestone potenza re050a 6/32
I ran these wheels on my 2015 c300 with no problems and being a 4matic.
Price is for wheels,tires,tpms sensor, and center caps.
All wheels have no bends. One very small spot where the lip was scraped but I have touch up paint to go with them.
Buyer pays shipping if it comes down to it. Or can meet within reason
price drop to 1800


located in Strongsville ohio

MBTECH28

JakeMS3

Forgot price and location.

MBTECH28

not quite sure how to edit right now but asking 2000 for everything.

located in strongsville ohio

hre841r

Hi, I am interested in purchasing this Wheels I wanted to check first with you because I also have 2015 C300 4matic ( same car like yours). Question for you:

1) When you run this Wheels with your w205 2015 C300 4matic, did you run into any rubbing issues?

2) Also on the front wheel how much is it sticking out from the fender? From the photo it looks quite sticking out so I was wondering if there is any rubbing problems with the outer fender because my car is also lowered with Vogtland springs.

3) From the photo it looks like your car is also lowered with Springs can you confirm? Thanks!

MBTECH28

i had no rubbing issues at all front or rear. Im lowered on h&r springs and
didn't rub with them. I can look for a better pic of the wheel with a side shot.
these were from an sl so the offset is a little off but I would just run a
spacer in the rear. the tires are the same size as the factory 19s so no issues with 4matic as well. will pm you my number.