trying to fix the 2 clips that broke...but now sure how to remove the side skirts...thanks in advance for the help

 

Don't know if you can see it but........Shizzen! Images wont upload. I'll put it on the other forum if you want.


http://forums.mbnz.org/forums/forums...sp?tid=1225833

 

You dont' need WIS to do it

side skirt are hold in place by clips under the frame., and 4 near to the door steps

unscrew two screws from both the front and rear wheel... first., then use a little force to yank out the sideskirt,.

 

Ok, my situation is 99 320 with no sideskirts. My kit will be arriving soon. Can I follow this same procedure to apply an RS sideskirt? I've taken off the front bumper so many times that I could do it with my eyes closed but having nothing to compare to I'm not picturing it. Thanks.

 

thanks everyone for the info....im gonna try it this weekend!

 

I am not very sure if you have the drilled holes under your car that hold those clips.,.. I can check on the EPC for you ... I'll give you updates

 

I've heard that the clips typically break when removing the sideskirts, but is it the top half or bottom half of the clip that breaks?

I've called the dealer and they wanted $3.60 for the male clip and $2.25 for the female clip ($5.85 for the set). They also told me that I would most likely need all ten pieces (5 male and 5 female) plus the screws at each end that hold the sideskirts.

I'd like to know which ones I should expect to break so that I can have spares and avoid having to drive to the dealer with no sideskirts.

 

hey timmy...im not sure if i have the drilled holes...thanks for the updates