2.3 16 - Charging circuit go through the Volt Gauge?
#1
Newbie
Thread Starter
Join Date: Apr 2015
Location: Mesa, AZ
Posts: 2
Received 0 Likes
on
0 Posts
2.3 16V / E30 M3 / '72 Pantera / '72 2002
2.3 16 - Charging circuit go through the Volt Gauge?
'86 2.3 16. Does the charging circuit go through the volt gauge? My Gauge has gone dead and I am only getting 11.23v (at best) Checked at the battery and from the alternator. I believe the alternator is dying as well, but just want to make sure I am not getting a voltage drop due to the volt gauge being in-op. I did check the input at the gauge and it is only reading low 11's as well, so it would appear the issue is before the gauge.
Thanks and regards;
Tony
Mesa, AZ.
Thanks and regards;
Tony
Mesa, AZ.
#3
MBWorld Fanatic!
Join Date: Aug 2005
Location: Sarasota, Florida
Posts: 1,293
Received 194 Likes
on
167 Posts
16 E550 Cab, 2003 Ram bright red crewcab 4x4 we call Clifford :)
Tony,
Sounds like the alternator or maybe just the voltage regulator is bad... the regulator should be mounted on the alternator, disconnect the battery then unbolt the regulator...
check the brushes.... should look something like this....
http://www.pelicanparts.com/catalog/..._pg1.htm#item1
if they are unevenly worn than the alternator is on the way out as well...
Mike
Sounds like the alternator or maybe just the voltage regulator is bad... the regulator should be mounted on the alternator, disconnect the battery then unbolt the regulator...
check the brushes.... should look something like this....
http://www.pelicanparts.com/catalog/..._pg1.htm#item1
if they are unevenly worn than the alternator is on the way out as well...
Mike
The following users liked this post:
TTz (06-27-2017)