Don Nguyen | **Vinyl Roof Wrapping Services + Stickers/Graphics and more!**
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I have had a lot of people ask me how vinyl looks when covered over damaged paint or paint with clear coat failure. Here is the best example I could find at the moment in my picture data base. The owner of this blue Honda Civic coupe had me vinyl wrap the roof of their car with my gloss black vinyl material. As you can see in the before pictures, you can see that basically the entire roof was having clear coat failure. It is somewhat hard to see in the after pictures versus how it looks like in person. However, in one of the pictures I put a red box around the area that you can see how the uneveness resulting from the clear coat failure does show through the vinyl a bit still. Even though this is not a perfect solution to peeling/failing paint, it is still better than what was there before and will prevent further paint damage from the sun, etc.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this car, I blacked out the chrome brushed aluminum window trim on the car with my black vinyl material and also lightly tinted / smoked the tail lights for this black Mercedes Benz C300 sedan. The owner of this car drove out to me in Orange County / Anaheim Hills to get the vinyl work done. We decided to go with the matte black finish to give the car some contrast still, over the gloss black vinyl finish for the window trim. Also, for the tail lights, we also went with the clear portion cut out to give it a little bit more of a contrast as well.
Before:
After:
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this black VW Passat drove out to me in Orange County / Anaheim Hills from Los Angeles county to get some vinyl work done. He wanted me to black out the chrome / brushed aluminum around his windows and to also lightly tint his tail lights. The pictures may seem over exposed in some of them, but I did that on purpose, as to capture how the tail lights looked at those exact moments and in those lighting conditions. For the window trim, we went with my matte black vinyl material.
Before:
After (note - far right tail light piece is not tinted, but the other 3 to the left of it are):
-Don Nguyen
donathon@gmail.com
Before:
After (note - far right tail light piece is not tinted, but the other 3 to the left of it are):
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I know this isn't for most people, but the owner of this silver Nissan 350z approached me with the idea of wrapping basically the top half of his car in the 1080 3M gloss carbon fiber vinyl material. It's definitely going to be different from just getting the roof top wrapped and that's what the owner of this car wanted. I tried to take multiple pictures of the car from various angles to show how the weave and pattern looks like in different lighting/angles. I've seen this done with cars in different colors (such as black, etc), but not with carbon before. I also tinted his head lights and tail lights, but these pictures are a bit old, and it was of a darker shade that I no longer use. The owner of this car was around Orange County as well and came to me in Anaheim Hills to get the work done.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here are some pictures of a black Mercedes Benz E63 AMG that I did on my most recent trip up to norcal / bay area. The owner of this car had me vinyl wrap the chrome / brushed aluminum trim on his car with my matte black vinyl material. I believe he originally was going to have me tint his lights as well, but he went ahead and had them painted instead before I made my trip up there. Unfortunately, he got pulled over the the tails being too dark. The advantage of vinyl in this case would have been that it would have been easy to reverse/pull off the tint film material and go back to stock if needed.
I didn't take any before pictures, as I didn't have much time between cars, so I only took pictures of the after results.
-Don Nguyen
donathon@gmail.com
I didn't take any before pictures, as I didn't have much time between cars, so I only took pictures of the after results.
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this dark blue Subaru WRX hatchback wanted me to red out his tail lights, to make it not so white/clear. So what I did for him was use my clear red vinyl film and applied it over his rear tail lights. He wanted me to cut out the reverse light and turn signal portions so that they would show through their original colors still. However, I took in progress pictures to show you guys how it would have looked like if they weren't cut out, so you can compare and contrast which style/look you'd prefer more.
Before:
In progress/during
After:
-Don Nguyen
donathon@gmail.com
Before:
In progress/during
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this white Lexus IS250, the owner wanted to have me black out the roof of his car with my gloss black vinyl material. We went with the gloss black to give it that panoramic/glass look. The gloss black roof went well with the other black pieces that were on the car (black inserts/accents on the side skirts and roof spoiler, which was only taken off for the install). The only other thing I could have possibly suggested to doing to this car is also blacking out the chrome around the window trim area. However, that comes down to a preference thing and some people prefer having/leaving it chrome, but I like the blacked out look for the chrome since it gives the car a much sportier look. The owner of this car came out to me in Orange County/Anaheim Hills to get the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is another car that I worked on during one of my trips up to norcal/bay area to do vinyl wraps. I really like the way this car turned out. It's not often that a black car has me vinyl wrap their roof, but the owner of this black Mercedes Benz E55 AMG had me vinyl wrap his roof with the 3M di-noc matte carbon fiber finish vinyl material. The final result and effect is as you can see below. The matte/carbon finish roof really gives the car some more character in my opinion.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this brand new black BMW F10 5 series, I blacked out the chrome/brushed aluminum window trim with my gloss black vinyl material. The owner of this car opted to go with the gloss black finish over the matte black to give it the look of the original BMW shadow line blacked out window trim that comes from the factory. Overall, I think it changed the look of the car dramatically, even for something as small/simple as just the chrome trimming around the windows. The owner of this car drove out to me in Orange County/Anaheim Hills to get the vinyl work done.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This brand new white F30 335i sedan came in to have me vinyl wrap the roof of his car with my gloss black vinyl material. He also wanted me to black out the lower sides of his front bumper, where splitters would typically go, with the same finish. He drove out to me in Orange County/Anaheim Hills to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Here is a car that I worked on during my norcal/bay area trip in San Jose. The owner of this car wanted to go with the 3M dinoc matte carbon fiber vinyl for his roof. As you can see, the material looks different from different angles. I tried taking it from multiple perspectives/angles to show you guys this effect. The carbon roof definitely gave this car a more aggressive look and I thought it went fairly well with the rest of the theme of the car.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I worked on this blue VW R32 MkV while up in norcal/bay area. For this car, I used my light smoke/tint film material on the car's tail lights. I took some before, during, and after pictures to show you guys the progression and how it compares to stock side by side. Overall, the shade of vinyl that I use is fairly light and gives the car that OEM+ look without being/looking too dark.
Before:
During (driver/left side stock - passenger/ride side smoked)
After:
-Don Nguyen
donathon@gmail.com
Before:
During (driver/left side stock - passenger/ride side smoked)
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is a returning customer of mine. The owner of this car previous has had me black out some chrome on his 5 series GT and also tint the tail lights on his X6 M before. I ended up doing this car at his house, since he happened to live down the street from me in Irvine, so it just worked out. We went with the matte black finish on this car to match the matte black B pillars that were already on the car. This was a brand new black BMW F10 528 sedan, and the slight change from chrome to black made quite a difference in the overall car's appearance.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
You might see me post a lot of white cars, followed by black cars, but I also do get cars that are other than black and white that come by to get work done as well. I thought the gloss black roof for this red Infiniti G35 coupe turned out very well. The gloss black roof went well with the black/dark colored rims that were already on the car, which was the look that the owner of this car was trying to go for. He drove out to me in Anaheim Hills/Orange County to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I don't know why, but I just don't end up posting very many pictures of the interiors that I have wrapped. I thought I had more pictures of this interior, but only one of them turned out well enough to post, since the others ended up being too dark, due to angle/lighting inside the car. This is the interior on an IS250/IS350 that I wrapped all of the hard wood pieces with the 3M 1080 gloss carbon fiber finish. The owner of this car had me wrap the pieces while still in the car. It's a nice change from wood, for those who are looking to get rid of the wood look or going after a sportier look.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is one of the few new BMW F30 silver 328i sedan that I have wrapped with the 3M Di-noc matte carbon fiber finish recently. As you can see, the finish/look of the cf vinyl roof changes depending on the angle that you are looking at it and how the light reflects off of it. The matte carbon roof complimented the darker colored wheels that were on the car fairly well. The pictures don't do it much justice, since I was mainly focusing on capturing an accurate portrayal of the roof vs the finish of the wheels. The owner of this car drove out to me in Anaheim Hills/Orange County to have his roof wrapped.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
Did a light tint/smoke install on this darker grey/gunmetal BMW 750i sedan F01. I took some before, during, and after pictures to give you guys a better picture of how the subtle changes/progress is like with my light tint/smoke vinyl material. I think the tail lights being slightly darker gave it a nice OEM+ look without making it look too modified, which is what the owner was trying to maintain. In addition to the tails, I also dod the reflectors in the bumpers to make sure that everything matched in the rear. The owner of this car drove from Los Angeles out to me in Orange County/Anaheim Hills to get the work done.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I blacked out the chrome/brush aluminum trim on this black Mercedes Benz CLS550 with my matte black vinyl material. We went with the matte black finish over the gloss black finish to give it some more contrast and a somewhat more of an aggressive look. I think it overall went fairly well with the look of the car. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done. In addition the window trim, I also did the rear trunk bar that was chrome, which tied in nicely with the blacked out badges/emblems that were on the trunk as well. Only other thing that I could have possibly suggested is to also lightly tint the clear portion of his tail lights.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this white VW CC sedan had me vinyl wrap the roof of his car with my gloss black vinyl material. The car was brand new, and the owner wanted to give it that panoramic and two tone look. The car did not have a sunroof, so the black roof was seamless up top, which gave it a very nice large mirror effect and smooth look. I took some up close pictures of the edges to show you how I am able to cut the edges/lines straight even on cars that do not have roof rails (IE BMWs, Mercedes, etc).
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
I took a lot of pictures of this white BMW E90 335i sedan when I wrapped it. The owner of this car wanted me to wrap his roof in the 3M 1080 gloss carbon fiber vinyl material. I also did the top portion of his bumper where it meets with the splitter, to try and give it a continuous look. It was a bit overcast the day I did this car, so it's actually a bit hard to tell that the film was actually the gloss carbon finish and not the dinoc matte carbon fiber finish. The rear trunk spoiler is also real cf in addition to the front splitter, so you guys can sort of get an idea of how real cf and the carbon fiber material I am using compares up next to each other. The owner of tho car drove out to me in Anaheim Hills/Orange County to have the vinyl work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
The owner of this dark blue Subaru WRX had me my clear/transparent red vinyl film on his tail lights. I know most people are used to seeing me use my smoke/tint shade on tail lights, but I also have other colors such as red and yellow for tail lights, fog lights, etc. I took some pictures of the progress, for those who want to see how it is done. Also, some people also prefer the look of the whole tail lights completely red versus having the center portions cut out to be clear. The owner of this car drove from Tustin to me in Anaheim Hills/Orange County to have me vinyl his tail lights.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
On a black car more than any other car color, the chrome finish stands out quite a bit. The owner of this new black BMW F10 5 series had me black out the chrome window trim on his car with my matte black vinyl material. If he wanted to complete the black out look, I could have also done the small strip on the door handles and also the front amber reflector in the same matte black vinyl material or my gloss black finish so that it'd blend in with the car better. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done.
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
For this white Mercedes Benz C300 with my gloss black vinyl material. In addition to the roof being done, I also blacked out the chrome/brushed aluminum window trim and rear trunk bar on his car with my matte black vinyl material. The owner of this car drove out to me in Anaheim Hills/Orange County to have the work done. It's kind of hard to tell that the trim is matte in the pictures, but these pictures are for those who want to see what a gloss black roof and matte window trim looks like.
-Don Nguyen
donathon@gmail.com
-Don Nguyen
donathon@gmail.com
Thread Starter
Former Vendor of MBWorld
Joined: Mar 2008
Posts: 19,593
Likes: 30
From: Irvine, CA
Euros
This is a long time customer of mine that has had me worked on several his past/previous cars. The owner of this X6M had me lightly tint the tail lights of his car with my light tint/smoke vinyl film. The lighting wasn't that great, but hopefully you guys can see the back to back comparisons between the before and after pictures. The owner of this car was located in Irvine/Orange County. I like this light tint film shade, because it gives the car a very OEM+ look and looks good on both a stock car or a modified car.
Before:
After:
Before:
After:
-Don Nguyen
donathon@gmail.com
Before:
After:
Before:
After:
-Don Nguyen
donathon@gmail.com
