C Class 220 1998 model
07-18-2018, 09:20 AM
#1
Newbie
Thread Starter
C Class 220 1998 model
Vehicle start could not raise and goes off immediately. All efforts to make it work properly proofs abortive. The problem came up when it suddenly went off at low gear and could not start from that moment. Please what should be done? The vehicle is manual transmission.
Last edited by Kanmi; 07-20-2018 at 04:28 AM. Reason: Additional information
07-19-2018, 10:26 AM
#2
Junior Member
Join Date: Mar 2017
Posts: 65
Likes: 0
Received 10 Likes
on
10 Posts
1995 E420, 1998 E300TD, 2002 CL230K 6spd, 2002 CL230K auto, 2002 CL280T VR6 Project, 2001 A6 2.7T
Vehicle needs diagnosis with scan tool first, but sounds like it could be the transmission is in "limp mode"
This stuff requires SDS level scan tool to properly diagnose the problem.
This stuff requires SDS level scan tool to properly diagnose the problem.
The following users liked this post:
Kanmi (07-20-2018)
07-20-2018, 10:23 AM
#4
Junior Member
Join Date: Mar 2017
Posts: 65
Likes: 0
Received 10 Likes
on
10 Posts
1995 E420, 1998 E300TD, 2002 CL230K 6spd, 2002 CL230K auto, 2002 CL280T VR6 Project, 2001 A6 2.7T
If the "Check Engine" lamp is illuminated in the instrument panel you need to get the fault codes read out with scan tool first. In the US we can go to local auto parts store like Autozone and get free scan for codes in engine computer.
