Made an intake for the C Coupe finally..
06-02-2003, 12:06 AM
#26
Super Member
Thread Starter
Join Date: May 2002
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
Hi eason, I will post as soon as i am out of school tommorw early afternoon. Its midnight now, need more light outside hehe..
THe bracket basically look like this...
_
|
|
|
------
The bottom part attach to the supercharger inlet with an allen bolt.
And a hose clamp goes around the bracket and this is what makes it real tight.
Sorry if its confusing i dunno how to explain it better. I will have a picture tommrow.
THe bracket basically look like this...
_
|
|
|
------
The bottom part attach to the supercharger inlet with an allen bolt.
And a hose clamp goes around the bracket and this is what makes it real tight.
Sorry if its confusing i dunno how to explain it better. I will have a picture tommrow.
06-02-2003, 05:04 AM
#27
Senior Member
Join Date: Mar 2002
Location: Vancouver, BC
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
W212 E63
Originally posted by x15jq
Hi eason, I will post as soon as i am out of school tommorw early afternoon. Its midnight now, need more light outside hehe..
THe bracket basically look like this...
_
|
|
|
------
The bottom part attach to the supercharger inlet with an allen bolt.
And a hose clamp goes around the bracket and this is what makes it real tight.
Sorry if its confusing i dunno how to explain it better. I will have a picture tommrow.
Hi eason, I will post as soon as i am out of school tommorw early afternoon. Its midnight now, need more light outside hehe..
THe bracket basically look like this...
_
|
|
|
------
The bottom part attach to the supercharger inlet with an allen bolt.
And a hose clamp goes around the bracket and this is what makes it real tight.
Sorry if its confusing i dunno how to explain it better. I will have a picture tommrow.
06-02-2003, 02:46 PM
#29
Member
Join Date: Oct 2002
Location: San Francisco
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
2002 CLK320
thats a nice setup there.
How's the heat on the tubing? If you're really trying to inch out every HP out of that, and the tubing gets quite hot, trying some Thermo-Tec wrapping. The heat can actually decrease your HP.
https://mbworld.org/forums/showthrea...t+thermal+tape
thats of course if you do or dont care for the shiny chrome look of the tubing or having it wrapped in "mummy" gear
How's the heat on the tubing? If you're really trying to inch out every HP out of that, and the tubing gets quite hot, trying some Thermo-Tec wrapping. The heat can actually decrease your HP.
https://mbworld.org/forums/showthrea...t+thermal+tape
thats of course if you do or dont care for the shiny chrome look of the tubing or having it wrapped in "mummy" gear
06-02-2003, 02:50 PM
#30
Super Member
Thread Starter
Join Date: May 2002
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
To be honest it doenst get too hot at all. I am surpzied, but I think because it is away from ontop of the engine it doesnt get very hot. The elbow is the only part that can get pretty warm
The swoosh sound is very loud with the can strapped to the top. My car is extremely loud now.
I do feel a bit better throttle response but maybe this is because the noise makes me feel like im faster, but im happy with how my car sounds with the exhaust and this unique mod.
The swoosh sound is very loud with the can strapped to the top. My car is extremely loud now.
I do feel a bit better throttle response but maybe this is because the noise makes me feel like im faster, but im happy with how my car sounds with the exhaust and this unique mod.
06-02-2003, 03:01 PM
#31
Senior Member
Join Date: Mar 2002
Location: Vancouver, BC
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
W212 E63
Originally posted by x15jq
To be honest it doenst get too hot at all. I am surpzied, but I think because it is away from ontop of the engine it doesnt get very hot. The elbow is the only part that can get pretty warm
The swoosh sound is very loud with the can strapped to the top. My car is extremely loud now.
I do feel a bit better throttle response but maybe this is because the noise makes me feel like im faster, but im happy with how my car sounds with the exhaust and this unique mod.
To be honest it doenst get too hot at all. I am surpzied, but I think because it is away from ontop of the engine it doesnt get very hot. The elbow is the only part that can get pretty warm
The swoosh sound is very loud with the can strapped to the top. My car is extremely loud now.
I do feel a bit better throttle response but maybe this is because the noise makes me feel like im faster, but im happy with how my car sounds with the exhaust and this unique mod.
x15jq..
do you think this plastic elbow works? or I have to get a metel one?? and I really like to see the picture of your bracket. Thx
Last edited by eason; 06-02-2003 at 03:03 PM.
06-02-2003, 05:15 PM
#36
Super Member
Thread Starter
Join Date: May 2002
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
No I have a neoprene 3 inch to 2.5 inch reducer. It sits about 3 inches into the inlet itself.
It is a tight fit so I push it in, then I clamp the 3 inch section of it to the elbow which is held securely with a hose clamps and the bracket on the SC inlet.
It is very secure and airtight.
It is a tight fit so I push it in, then I clamp the 3 inch section of it to the elbow which is held securely with a hose clamps and the bracket on the SC inlet.
It is very secure and airtight.
06-02-2003, 08:59 PM
#38
Super Member
Thread Starter
Join Date: May 2002
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
And just remember u need a civic intake pipe as well.
I just happen to have one here so it all worked out, not sure what else would work. Basically something need another 90 degree angle to bring it down by fog light
I just happen to have one here so it all worked out, not sure what else would work. Basically something need another 90 degree angle to bring it down by fog light
06-02-2003, 10:21 PM
#39
Senior Member
Join Date: Mar 2002
Location: Vancouver, BC
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
W212 E63
Originally posted by x15jq
And just remember u need a civic intake pipe as well.
I just happen to have one here so it all worked out, not sure what else would work. Basically something need another 90 degree angle to bring it down by fog light
And just remember u need a civic intake pipe as well.
I just happen to have one here so it all worked out, not sure what else would work. Basically something need another 90 degree angle to bring it down by fog light
Problem just came up when I search ebay.. if I ues the rubber right angle pipe to connect, I won't be able to put the neoprene 3 inch to 2.5 inch reducer into the supercharge inlet..
06-02-2003, 10:36 PM
#40
Super Member
Thread Starter
Join Date: May 2002
Posts: 960
Likes: 0
Received 0 Likes
on
0 Posts
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2417102134
This type will work fine it has metal pipe for the 90 degree bend..
then you will connect the 90 degree bend to a civic intake pipe, then use the focus piece for the bottom portion.
Im sure theres other pieces u can use, it was luck that the civic pieace points the intake down into the bumper without cutting and i just extend this with teh focus pipe to put it by the fog light. It goes all the way to the bottom.,
This type will work fine it has metal pipe for the 90 degree bend..
then you will connect the 90 degree bend to a civic intake pipe, then use the focus piece for the bottom portion.
Im sure theres other pieces u can use, it was luck that the civic pieace points the intake down into the bumper without cutting and i just extend this with teh focus pipe to put it by the fog light. It goes all the way to the bottom.,
