benzo-boi

Okay, I have been reseaching on doing the quad exhaust mod. I think I'm going to buy the actual C63 diffuser and the actual C63 quad exhaust. I have a friend at a MB dealer so he can hook me up with his cost for the exhaust. My question is, will the C63 exhaust system work? Does anyone know if there's a size difference for the muffler and will it be a straight bolt on?

Flame3g

those mufflers are going to be expensive don't you think

benzo-boi

Not too bad, $1600 for AMG exhaust/mufflers.

micropower99

Really? Not bad at all. I'm pretty sure they would fit. How much are you able to get the diffuser for?

GPI

I'm interested in the C63 exhaust and diffuser as well. Would you be able to help me order it with the same price?

benzo-boi

Diffuser should be around $200-$250.

Sorry, I can only get it for me. If he knew I was hooking up other ppl even my friends, he wouldn't like that.

hanz

if it fit. go for it. i would do likewise but we have quite strict and cumbersome regulations with regards to exhuast mods. you could also consider the Carlsson quad exhaust. they are really only made for the MBs. great tuner buggers.

StickyZ

why is everything looks on the MB's forums? you guys want a 3.0 or a 3.5 motor to pull enough air through the intakes and create enough back pressure to warrant 4 channels of back end airflow? all your really doing is spending 2k to make your car slower, have virtually zero launch capabilities and look ridiculous (well i agree the amg quad look amazing but not on a virtually stock C.) will 6.3 and amg stickers be the next mod? if you want that quad exhaust to at least be effective, first you need to think from the front end...headers, down pipes, bigger TB, cams, otherwise all the decent low end torque these 3.0 and 3.5 motors make...gonzo.

micropower99

Ummm, no

speedye500

dont know who this is but if it is real i like it.

W204 C300 with C63 exhaust

http://www.youtube.com/watch?v=uM-JmvUQ8Ww

Flame3g

just trying to do little light mods right now. Talked to a sponsor already about headers. so when the warrenty is up i'll start with heavy mods

GPI

$1600 for the mufflers only or the whole exhaust system until the catback?

benzo-boi

Its from the middle to the back. Not from the front to the back.

Derspeed

That's great. Too you can't see the whole back end of the car.

Flame3g

don't know about that vid can't tell if its a w204 or not

CarGuru

It sucks you can't see the back, but that is definitely the sound of a V6. Sounds clean and nice but I thought it would be a little more raw like the 6.2L

-Ryan

Flame3g

yeah might be a v6 but just might be tips, might not be the c63 exhaust. i'm questioning it until i see otherwise

gokalp

Hi joining the thread from The Netherlands, I did buy the original C63 AMG echaust system and it works just fine, in higher rev I have the more HP. It looks fantastic. The car and engine can handle the system very well. It works fine on the 4 cylinder and 6 cylinder W204 cars. The 4 cylinders have only one pipe going form the engine to the back, so a Y split must be made. And then it still sound fantastic this is for the 4 and 6 cylinder. The 6 ofcourse sounds much better. It cost me 1721 Euro including defuser and montage. Don't hastited, go for it.

micropower99

How did you get it? Do you know the part numbers?

James187

Have you put it on a 4 cylinder? If so have a video clip? Thanks

Flame3g

hey gokalp could you post some pics and sound clips

hanz

good job Gokalp. u did something that we are all been dreaming about. what is the drive that you mod, a 4-cylinder C200k or the 6-cylinder C300/350 ? post some pics when u can. cheers.

benzo-boi

ok, I will post part #s as soon as I place the order. Sounds like it's going to cost me $2000 for the diffuser and the oem c63 exhaust. I will post pictures during the install and before and after picture.

micropower99

Sweet. Thanks

gokalp

Hi,

Sorry for the very late reply, yes I do have some picture, and made a sound recording.

Car is original a W204 180K Avantgarde AMG package, so it is a four cilinder machine. This mod works also fine on a 200K or 6 cylinder machine, the 6 sound beter as I said before.

Limits on the picture size, at this forum but it give you an idea.
As you can see, one original pipe from the engine had to be split into a Y split. When this is done, test have to be done to see if the left and right have the same amount of exhaust gas. If not the Y split needs to be adjusted.

Bare in mind, this is a original C63 spare part exhaust, I had to get a C63 VIN to get it. The replica exhaust, as far as I understood, don't give the same "sound" as the original one.

And ... there is no problem with the warranty, as the parts are original, and build in by a dealer.

Cheers,

Gokalp