license plate light - is it white or yellowish?
I am just wondering, see if anyone can help
|
it's a little yellowish white stock. Looks much better if you switch it out to super whites.
|
Originally Posted by Azn_C300
(Post 2997516)
it's a little yellowish white stock. Looks much better if you switch it out to super whites.
|
Switched all of the exterior 194's to Polarg M4's much nicer white. I have 8 M4's coming for the interior. going to do the 4 puddles, 2 footwells and 2 trunklights. Then I need something like 4 more to do the overheads. Any others I missed?
|
any website suggestions for the lights?
|
Originally Posted by Azn_C300
(Post 2997516)
it's a little yellowish white stock. Looks much better if you switch it out to super whites.
you get them from ebay? thinkin about getting them too... |
Originally Posted by who8888
(Post 3004864)
+1. Took mine out and replaced it with Raybrig 6000K white light bulb. Looks much cleaner.
no error messages were given? |
Originally Posted by rb23lb
(Post 3014908)
azn, how do you like the carbon fiber pillers?
you get them from ebay? thinkin about getting them too... |
Originally Posted by Azn_C300
(Post 3015187)
As Nike used to say...just do it
somebody on this board was saying that there are slight gaps on each side to where you can tell that they are stickers... |
There's no slight gap on the sides. Mine were cut perfectly on sides. The only place is the top. If you look at how the pillars are shaped, you can see that the top kinda curves in and leaves a slight gap between the pillar and the top rubber. The CF part does not curve like the shape of the pillar up top so just sits flat. Looking straight at it, you can't tell, but from an angle and up close, you can see the gap. But yeah, they'd have to get pretty close and know what to look for to actually see it.
But just a warning, CF is like crack...once you get the addiction, you won't stop with just the pillars... |
Originally Posted by Azn_C300
(Post 3015403)
There's no slight gap on the sides. Mine were cut perfectly on sides. The only place is the top. If you look at how the pillars are shaped, you can see that the top kinda curves in and leaves a slight gap between the pillar and the top rubber. The CF part does not curve like the shape of the pillar up top so just sits flat. Looking straight at it, you can't tell, but from an angle and up close, you can see the gap. But yeah, they'd have to get pretty close and know what to look for to actually see it.
But just a warning, CF is like crack...once you get the addiction, you won't stop with just the pillars... all i have is the freakin door pins and i can stop gawking at every little carbon fiber mod i see... |
Originally Posted by rb23lb
(Post 3014910)
link to where i can get this replacement bulb?
no error messages were given? |
All times are GMT -4. The time now is 10:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands