Cheap(er) -C63 Diffuser OEM Quad Tip Solution! * Inside!*
After searching & searching & more
searching Online, EBay, at Local Exhaust Shops & numerous Private Messages to people that have already done this (using SLK55, E55 tips, etc…) thanks micropower99… My dealer could not get just the tips, only the AMG’s mufflers with the tips $$$. 
I have found a Factory Oval Tip with very close width & height (within 1/16”) to the real AMG C63 Tips! I just left the dealer and measured the C63 tips 4-13/16” against the……….… WAIT A SECOND
………. a C350 sport
4-3/4”That’s only 1/16” difference! 2.5mm difference to the people outside the U.S.A. The height is the same!
Long story short I ordered them! The cost is only $84 bucks each! I just have to reuse the other two on the car. That’s not too bad for me I just picked up the C350 on Sept. 15th, so my tips still look new.
While these tips may not say AMG on them, they are readily available, OEM, The right Shape& Size. That’s cool with me. My quest to find tips was getting tiring.
And… Yes the C350 & C300 are the same part #’s
Also measured the C63 opening and it’s approximately 11-3/4” if anyone was curious.
Here are the tip part #’s 204 490 63 27 & 204 490 64 27
Last edited by VaderSS; Oct 1, 2008 at 04:50 PM.
Spec_Davis... there are a few posts already with pics... maybe none with these tips though? My diffuser is not here yet. I will post pics when I do this..
I only have one day a week to goof off with this car... last week I posted the reverse camera/VIM DIY https://mbworld.org/forums/c-class-w204/262634-diy-rear-camera-install-w-pics-centered-location.html.
This friday i'm doing the factory illuminated door sill install DIY with pics... it looks not to bad but has its own CAN control unit (how fun!
).With the exhaust welding and alignment time consumption it may have to wait till the following week.... I'll keep everybody informed..
Spec_Davis... there are a few posts already with pics... maybe none with these tips though? My diffuser is not here yet. I will post pics when I do this..
I only have one day a week to goof off with this car... last week I posted the reverse camera/VIM DIY https://mbworld.org/forums/showthread.php?t=262634.
This friday i'm doing the factory illuminated door sill install DIY with pics... it looks not to bad but has its own CAN control unit (how fun!
).With the exhaust welding and alignment time consumption it may have to wait till the following week.... I'll keep everybody informed..
What is the best place to get the OEM c63 diffuser you have found (or legit LEGIT replica?) ?
The best price I have found is $250 from a local place (my other one fell through so i am out searching again)
Thanks!
rb23lb... Thanks man. The diffuser i think i paid less than $240 & the AMG bracket (the one that people make on there own)were like $20 each ...
I'll scan my recept from the dealer when I get it in. they havn't invoiced me yet untill the parts come in.
Trending Topics
The Best of Mercedes & AMG
There's an interest.....
Others have already done this.....
Personal aesthetic preference…..
Not for everyone.....
Don’t know if you were being sarcastic or haven’t seen other posts on this mod?
rb23lb... Thanks man. The diffuser i think i paid less than $240 & the AMG bracket (the one that people make on there own)were like $20 each ...
I'll scan my recept from the dealer when I get it in. they havn't invoiced me yet untill the parts come in.
do you have the part numbers for the AMG brackets you are going to use... and the AMG diffuser part number as well (might as well add it to this thread too just be sure)
AMG L & R Brackets A204 885 23 14 and A204 885 24 14
ohh ... Sorry the price for the diffuser was $264 and the brackets were $24 each my bad.
i guess most people make their own?
But i assume it looks much cleaner underneath with the OEM brackets...
even with the brackets though... is it simply plug and play, or does it require some modifications???
TIA
look at the first 2 pictures (L brackets)... I ordered the AMG L brackets.
There's nothing wrong with that. For me I just want an OEM look, wait.... after i'm done it will be OEM
..... Parts that is!It just comes down to individual style.
As far as the plug-n-play.... let me install it then i'll tell you
There's an interest.....
Others have already done this.....
Personal aesthetic preference…..
Not for everyone.....
Don’t know if you were being sarcastic or haven’t seen other posts on this mod?

Thanks! Wasn;'t being sarcastic at all....Just wanted some insight.



