C350 with C63 Front Bumper
4 Attachment(s)
I change the front bumper of my C350 with the C63, I like to know if another person did the same, I change too the rear diffusor with four exhaust (two are fake) and paint in CF, my next step is change the piping of C63. Sorry the picture has poor quality, but I can show better picture as requested. The picture show an aftermarket grille, but was change with the original one.:)
C350 - 2008 Mars Red , C63 Front Bumper, C63 Rear Diffusor in CF, Quad Exhaust, AMG trunk logo, 6.3 amg fender emblem, AMG seats emblem. Tint 35% Future: Replace the exhaust for AMG C63, Add a 5 channel amp with a subwoofer with original Radio. Front lip bumper 20" wheels Increase the engine HP to more than 350 HP in the tire |
Looks good. :zoom:
|
How do you plan on hitting 350 HP at the wheels?
|
Increase the compresion, change the intake and NITRO
|
How do you plan on increasing the engine displacement from 3498cc to 6201cc?
|
I'm all about doing aftermarket changes to your car but not into making it look exactly like a C63, what happens when an M3 comes up next you and destroys you?? some 63 parts are ok, but to much is over the top.....IMO
|
looks good...the 6.3 fender emblem is a little too much...
|
Hey does the C63 front bumper fit perfectly on our cars with stock side panels and hood? What part number did you use for the bumper?
|
+1^ like the look of the front bumper. will it go on with no modification.....love the look but over boad with the emblems
|
+1
And it looks incredible. I think the W204 looks so good in red. |
My 2 cents
I like the front bumper, looks sweet but I agree with Flame3g those emblems have to go and the fake quad?? Is crazy you have a MB not a Lexus F1 it’s very simple to fabricate the quads, over all look nice
|
Originally Posted by popejp41
(Post 3219025)
I'm all about doing aftermarket changes to your car but not into making it look exactly like a C63, what happens when an M3 comes up next you and destroys you?? some 63 parts are ok, but to much is over the top.....IMO
It's called a posermobile...........it appears that even highend cars have posers as well. I expected this from v6 Charger owners when I had my SRT-8, now the base model Crossfire guys are making their cars look like SRT-6's and I guess it makes sense for the base model M-B owners to make fake AMG cars as well. :crazy: |
Originally Posted by moparrbust
(Post 3219299)
It's called a posermobile...........it appears that even highend cars have posers as well. I expected this from v6 Charger owners when I had my SRT-8, now the base model Crossfire guys are making their cars look like SRT-6's and I guess it makes sense for the base model M-B owners to make fake AMG cars as well. :crazy:
|
I'm guessing since there is a 6.3 badge on the side, he probalby put a C63 AMG on the back too... :(
|
I hope not such a fine automobile:y
|
Originally Posted by popejp41
(Post 3219025)
I'm all about doing aftermarket changes to your car but not into making it look exactly like a C63, what happens when an M3 comes up next you and destroys you?? some 63 parts are ok, but to much is over the top.....IMO
|
Originally Posted by tanktube67
(Post 3219320)
So MB is selling base models with fake AMG body stile :rolf:
I'm pretty sure that M-B doesn't sell C350s with "6.3 AMG" emblems on the fenders. I am well aware of the AMG "looks" package that give you similar if not exact body kit, wheels and a fancy "AMG" trunklid emblem while still having a lower end engine,suspension and interior. They have a similar package on Chryslers with the "SRT Design" package. :rolleyes: |
Originally Posted by micropower99
(Post 3219096)
Hey does the C63 front bumper fit perfectly on our cars with stock side panels and hood? What part number did you use for the bumper?
Haha... just toyin' with ya. :y |
Er... no car enthusiast is going to mistake this for a C63, one glance at the front = they know what's going on... unless you swap the hood too. smoke the housing on the headlights and then roll some big fenders, change suspension, change brakes, change rims, wow. lots of stuff... big $$$. I just hope no real C63 or M3 pulls up... cuz if I was driving a rebadged car, I'd be very very embarrassed and scarred for life. It would be a real crushing blow of defeat to my confidence... Just my 2 cents...
|
Looks good, but it would look better with the c63 hood. Right now it looks like something is missing.
|
Originally Posted by german-anger
(Post 3219503)
Er... no car enthusiast is going to mistake this for a C63, one glance at the front = they know what's going on... unless you swap the hood too. smoke the housing on the headlights and then roll some big fenders, change suspension, change brakes, change rims, wow. lots of stuff... big $$$. I just hope no real C63 or M3 pulls up... cuz if I was driving a rebadged car, I'd be very very embarrassed and scarred for life. It would be a real crushing blow of defeat to my confidence... Just my 2 cents...
|
I finished this project (Bumper C63) yesterday and was done in two weeks, the bumper is original MB C63,p/n:20488551259999, but was modified in each side, because is 1/2" more wide, the bumber has three foams, the center foam is the same of the C350, but the left and right was swap with C63, the bottom grille were replaced p/n:2048850553 2048850653 2048850453. The basic carrier was replaced p/n 2048852865.
The Foams Reinforcement were change left 2048850516 and rt 2048850616. The grille was replace two time, the only grille that fix is the original p/n:2048801083 lower, 2048800983 upper part and Stay for radiator grill 2048850336. Diffusor P/n:2048854525, need two brackets for the installation lt. bracket 2048852314 and rt. bracket 2048852414. The diffusor was painted in Carbon Fiber, yes PAINTED. The roof or wing spoiler is aftermarked. As you see, I spent many hours and try and error to find the correct parts to see a C350 as C63, but is the only one in the world. I share these quality) Next step, replace the piping C63, sounds greate, I replaced in one C300, only small modification is necessary.information with everybody that want to do the same, without many hours in try and error, here I show you the receipt. I will send more picture for details (but with better quality):word: |
You'll also need to download some audio clips of the C63's engine at ignition, idle, low revs, high revs, wot, etc. so you can play that through your stereo.
Can't have the looks without the sound! :p: |
As soon I change the Piping, the wheels, and add a little HP with Nitro (I did before in a M3 2004). Only a persons that can see details of the hood and fenders and it is very difficult a more than 30 feets. The sound is very similar with same piping (C63). If somebody need more information let me know.:D
|
Originally Posted by SebringSilver
(Post 3219548)
You'll also need to download some audio clips of the C63's engine at ignition, idle, low revs, high revs, wot, etc. so you can play that through your stereo.
Can't have the looks without the sound! :p: http://www.sunamiturbo.com/ :naughty: http://www.sunamiturbo.com/sunami.wav |
All times are GMT -4. The time now is 04:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands