Forest Jim

Hi People,

I haven't been to this page for a coupe of months and I sold my C300 late last year, In Jan I took delivery of a C63 Coupe. I posted this on the AMG Page and was hoping i could get some feedback.


My Aussie 2012 Coupe has Reverse Camera but no guide lines. I was at the dealers the other day and they asked if I love my car and I told them I love it but I wish it had 2 things..

Height adjustable Seat Belts (My Sedan did.. Good for young kids and me when i'm wearing a TShirt) and Guide Lines for Reverse Camera as my wife's ML350 has them. He said the reverse camera guides are not available on C Class. I left it at that.

I was looking in my Owners Manual and I found it. Page 187 - " Guide Lines in the Comand Online display. Depending on the date of mfg of the vehicle, the guide lines are shown on the display.

I emailed the dealer a copy of this and they advised " No one I am speaking to has heard of guide lines on c class. It has been suggested that it is for overseas models.

Ok..... Non Aussies do you have Guide Lines?

IF not has anyone been able to turn this feature on via Engineering Menu? If so how did you do it?



Cheers

Marty

MDMercedesGuy

From what I understand, they are not available anywhere in the world on the C Class.

That said, this is something that may hopefully come in a later software update. You should email MB of Australia and suggest that... I've suggested it through Generationbenz myself.

miloc204

i think i have them!my camera is the factory one but i installed it after i bought the car....

louiet3

For a US 2012 GLK350 I was able to enable the reverse camera guidelines through the engineering menu.

7 Hardware Setting
7.7 HU Parameter
7.7 (25) SRVC Guide Line
selected X204 for the GLK350

Forest Jim

Thanks.... I'll give that a go

Miloc.... Yes you have guidelines. Thanks

LAMB09

no luck for me on my 2011 c63, got in to the engineering menu but no option for enabling the reverse lines

Forest Jim

Ditto

StormTrooperZo

Don't know much about the c63 but just checking you guys looked on the second page in the engineering menu a lot of people missed the next page but if it's not there it is there

LAMB09

How exactly do you switch pages? I noticed page 1/4 on the top but couldn't seem to figure out how to get to the next page

StormTrooperZo

Push the knob on the center console to the right

LAMB09

Thanks, after I posted my post I went to the car and figured I would keep trying. Ended up finding the option and enabling the reverse lines. Not sure I like them compared to not having them.

Thanks again

Forest Jim

Hi,

Must be and Aussie 2012 C Class Thing.

I followed your steps up to HU Parameters but I have 10 pages not
4 like yours. Found Reverse Camera on page 3/10 no 21 get to SRVC but no option SRVC Guide Line, even when to click on this gives me other 3 other Letter options other than SRVC. Didn't want to click of those as it's getting late at night.

Anyone able to get it to work on their 2012 C?
I know it works on other models we have it on our ML at home.

Thanks

Marty

MB_inspired

It's not an Aussie thing. I don't have it in my Canadian 2012 C350 4matic either! And I do have the 10 pages of HU Parameter too. Interesting!

chewychiu

How do I get to the engineering setup pages?
I have an aftermarket cam, Kenwood CMOS-200.
Will I still be able to turn on the guide lines?

mmike

should be "Hangup / # / 1"

chewychiu

I followed this and when I shift to reverse, the backup cam doesn't turn on......I still have to play with it a little more but don't want to mess around with other settings I don't know about.

Memphis1

i have a diff menu... after HU Parameter, i get 11 pages, one choice is rearview camera, but inside there's 5 choices, srvc is one of them... anyone else know which one it is... and once i make the choice does it automatically become available??

louiet3

Select SRVC to Set RearView Camera. This enables the camera if you have one installed. Best you go through the post below and proceed to next step after SRVC was enabled.

mbworld.org/forums/glk-class-x204/415317-backup-camera-part1.html

louiet3

The steps I provided only enables the guidelines. To enable the camera you still need to do step i to iii mentioned in this post
https://mbworld.org/forums/4833879-post1.html

Memphis1

Thanks Louis, but my question is not how to set up the camera, my camera worked from day one. My question is how to turn on the guidelines.

louiet3

The screen shot you provided was for the HU parameter to enable the rear view camera. There may be another one to enable the SRVC Guidelines. For my 2012 GLK350 it was option 25.

turbo97se

This is an old thread that came up in a google search I did. It is likely you need a DAS 2010 with DAS developer enabled. Once you go in, you should be able to get to the menu below and enable the CAN ID 34 to get your lines … I managed to enable mine

Here is the menu. The CAN ID 34 needs to be turned on and the SRVC static guiding lines need to be set.

350MH83

you would be able to see the guide lines... However, if you have an aftermarket camera, then you need to make sure that the focal length/distorsion is the same than the OEM camera. If not, the guide lines will not match the actual size of the car.

chrisdean

Mine's a 2011 facelift UK model with a £20 Chinese camera that I fitted my self into COMAND. The lines must be embedded into the camera because there's no option in the menu for them. Incidently the lines are solid blue unlike the green/yellow/red that I've seen on other cars. It does show the MB warning "Check Entire Surroundings" though.

350MH83

The "check the surrounding" warning is coming from comand. If you disconnect your camera you will still see the warning, but the screen will be black. In your case you wont even see the guide lines as as you said, they come from the camera. There is still something to be aware of in this configuration though: the guide lines are normally made for a type of camera mounted on a specific vehicle. If the camera sits higher on one car than on another, then the guide lines with the higher car will draw a pattern on the ground that will actually be wider than the pattern the same camera would draw on a car where it is mounted lower. The inclination of the camera also affects that.