New Carbon Fiber Diffuser w/ fins for the c300/350 dual exhaust! Who's interested?
07-17-2010, 01:37 PM
#52
Junior Member
Join Date: Jul 2010
Location: NNJ
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
W204
Can you please provide a picture of the actual product when you can 
I'd much prefer keeping the dual exhaust rather than going quad !
Also I believe it was said either here or another MCD thread that you were in Jersey so I would look into a local pick up rather than shipping if that's possible ?? Thanks in Advance
I'd much prefer keeping the dual exhaust rather than going quad ! Also I believe it was said either here or another MCD thread that you were in Jersey so I would look into a local pick up rather than shipping if that's possible ?? Thanks in Advance
07-28-2010, 04:21 AM
#56
Former Vendor of MBWorld
MCD Motorsports, I wish you the best of luck with your new project, and I am sure the community would love to have alternatives when shopping. However with all due respect, please refrain from posting pictures of our product like you did as a baseline or referring to what your new part may look like. We spent many months designing our part, and do not tolerate any replicas. Our part is copyrighted, and also holds a US design patent.
07-28-2010, 02:37 PM
#59
Junior Member
Join Date: Jul 2010
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
2010 C350 & 2003 M5
Definitely a well made piece. But you have to pay for the R&D to get a nice fit and quality. The cheaper ones always leaving you wanting more in a lot of areas.
07-28-2010, 02:45 PM
#60
MBWorld Fanatic!
07-28-2010, 03:25 PM
#61
Junior Member
Join Date: Jun 2010
Location: FL
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
2010 C350
I agree that I have to pay for the R&D, no arguments there. I like the fact that I don't have to modify my exhaust to the quad set up, which is why I was following this thread. I just can't digest the price just yet. Perhaps down the line.
07-28-2010, 08:10 PM
#63
Former Vendor of MBWorld
Thread Starter
Join Date: May 2010
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
C63
MCD Motorsports, I wish you the best of luck with your new project, and I am sure the community would love to have alternatives when shopping. However with all due respect, please refrain from posting pictures of our product like you did as a baseline or referring to what your new part may look like. We spent many months designing our part, and do not tolerate any replicas. Our part is copyrighted, and also holds a US design patent.
I just wanted to clear a few things up. First off, I am sorry about posting a picture of your product without your approval. We do not intend to sell a copy of your diffuser. Your work has been the benchmark of Mercedes aftermarket Carbon Fiber for a few years now and we admire that as a company and I admire that as a Mercedes driver. The reason i put up the picture was to show the general readers what we mean by the fins on a C Class diffuser. Our product will be much different, I assure you that. I am sorry once again and i hope this issue is resolved! If you have any further questions, please feel free to PM me.
Also, I tried deleting the post with the picture but it didn't let me. Will a moderator come in and delete that post with the picture for me please!
Thanks,
Mark
MCD Motorsports
07-28-2010, 08:12 PM
#64
Former Vendor of MBWorld
Thread Starter
Join Date: May 2010
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
C63
On another note guys, thanks for all of replies and interest in our new project! We have just went into production of this diffuser and hopefully it is what you guys want!! I will provide pictures as the project moves forward in the next few weeks. 
07-28-2010, 08:29 PM
#65
Former Vendor of MBWorld
Euroteck,
I just wanted to clear a few things up. First off, I am sorry about posting a picture of your product without your approval. We do not intend to sell a copy of your diffuser. Your work has been the benchmark of Mercedes aftermarket Carbon Fiber for a few years now and we admire that as a company and I admire that as a Mercedes driver. The reason i put up the picture was to show the general readers what we mean by the fins on a C Class diffuser. Our product will be much different, I assure you that. I am sorry once again and i hope this issue is resolved! If you have any further questions, please feel free to PM me.
Also, I tried deleting the post with the picture but it didn't let me. Will a moderator come in and delete that post with the picture for me please!
Thanks,
Mark
MCD Motorsports
I just wanted to clear a few things up. First off, I am sorry about posting a picture of your product without your approval. We do not intend to sell a copy of your diffuser. Your work has been the benchmark of Mercedes aftermarket Carbon Fiber for a few years now and we admire that as a company and I admire that as a Mercedes driver. The reason i put up the picture was to show the general readers what we mean by the fins on a C Class diffuser. Our product will be much different, I assure you that. I am sorry once again and i hope this issue is resolved! If you have any further questions, please feel free to PM me.
Also, I tried deleting the post with the picture but it didn't let me. Will a moderator come in and delete that post with the picture for me please!
Thanks,
Mark
MCD Motorsports
08-01-2010, 12:09 PM
#66
Junior Member
Join Date: Aug 2009
Location: cali
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
08 c63
hey, do you guys have any pre-production or proto type pics up yet because euroteck just set up their version of the dual diffuser for a gb at a lowered price. i would like to compare the two before making a decision. thanks.
Last edited by DimSum9i6; 08-01-2010 at 12:15 PM.
09-15-2010, 12:51 PM
#75
Former Vendor of MBWorld
Thread Starter
Join Date: May 2010
Posts: 480
Likes: 0
Received 0 Likes
on
0 Posts
C63
Hey guys,
I promised you guys pictures by today so here they are! The first sample is not complete yet, we still need another day or two but this is the mold that we made for it. Hope you guys like it!
I promised you guys pictures by today so here they are! The first sample is not complete yet, we still need another day or two but this is the mold that we made for it. Hope you guys like it!
