dudeitsmattx

Check out oewheelsllc.com they have the best prices on TPMS I could find. This is where I get mine from as do others on this forum.

Havardekul

Will these rims fit, and what tire specs do you recommend?
Car is on stock sports suspension.

(W204 C220CDI)

WIDTH: 9" Front / 10" Rear
OFFSET: et42 front / et45 rear

Or

9x19 ET42 all around

w204dant

It will be close I'm running 18x8.5 et42 and 18x9.5 et38 in the front I have plenty of room I could have ran a 18x9 and my rear is about 1mm away from rubbing when I tuck tire lol (255/35/18) is my rear tire hope that info helps

dudeitsmattx

Going 10" wide in the rear I would not go over et47 but 2mm should not make much of a difference. If you plan to lower you will encounter rubbing issues.

CHATMANR

I love the wheels; what are they? Also, because it would be my wife's daily driver, what offset would I use if I was to go a 1/2 inch smaller for the front and rear to keep the from being scratched? Would be able to keep the same tire sizes?

MB Marko

looks sharp

MB Marko

Ya I'm defiantly going 18's I need something thats great quality as well as keeping my ride feel nice also i looked at 3piece rims i didn't find one style that i liked. AMG rims are nice but everyone has them I havens seen many C class with the Mandrus Rotec rims and the ones Ive seen online look amazing also its usually the c63 they throw it on online.

dudeitsmattx

*Chatmanr - Going 1/2' smaller width won't help much in terms of curb rash. Just teach her how to drive right lol..

*Newmbmarko - Have you looked at the the companies that see 3 piece wheels? There are at least 30 different companies and all have tons of different styles and designs.

MB Marko

yes i have i have been looking for a month now every night for 2 hours plus I'm sick of looking hahaha i feel like a girl looking for a wedding dress

dudeitsmattx

Haha I feel you!! I was the same way! Spend so much time looking for wheels and the right offsets. I found lots of wheels I like but the offsets were always wrong. So that's why I went custom 3 piece

aknedude

They are ISPIRI ISR 10 Wheels
http://www.ispiriwheels.com/ispiri-isr10.html

Becksan

You can also get them as MRR GroundForce GF9 - they are marked with the Inspiri on the wheel.

Or mine are at least 😉

Becksan

You should be good at those offsets. I got the GF9 in ET40 & ET42 which are flush with 235/265 tires.

MyManDan26

Will rims with a 35mm offset fit these tires?
225 35 19 Front
255 30 19 Rear

Apparently my rims are out of stock. I already bought the tires so I'm going to just buy the rims in gunmetal and have them chromed myself. I can only find them in 19x9.5 40mm offset and 19x8.5 35mm offset. The original ones I bought were 45mm
will these fit?

19x9.5 40mm
19x8.5 35mm

dudeitsmattx

Yes they will all fit. Offset has nothing to do with tire size

Havardekul

Front 19 x 8.5" ET45.00
Rear 19 x 9.5" ET40.00

Will these work, and with what tires?
Stock sports suspension.

dudeitsmattx

Yeah they will work. Go with 235/35/19 and 255/30/19

MyManDan26

Anyone have a pic of what 8.5 9.5 ET35mm all around looks like? After reading some posts on here I'm worried about the wheels rubbing. I read that there is only a credit card space of clearance.

MB Marko

I tried to put 35et on and it was poking out front and back now I'm going with 45 front 54 rear

MyManDan26

I dont mind if they poke, I just dont want any rubbing.

dudeitsmattx

My fronts are 19x8.5 ET 35 and lowered on coils and I don't have any rubbing up there. As for the rear I have 19x9.5 ET 40 and only the passenger rear rubs for some reason. with ET 35 it would rub a little more since it would be 5mm more poke.

MyManDan26

Probably going to send the set of rims I got back then. They're all 35mm offset, most AMG style rims I saw were 35mm.

ripratama

Hello folks,

Greetings from Jakarta, Indonesia. I recently acquired a Classic-trim C200 Kompressor and would like to upsize the wheels with either of these specs:

Front 18" x 8" ET35
Rear 18" x 9" ET35

Or

Front 18" x 8.5" ET35
Rear 18" x 9.5" ET35

Planned tyres are 225/40 and 255/35 fronts and rears respectively.

Will both specs clear the fenders? There may be 3 persons in the back on some occassions. Not planning to lower it; however may change the spring pads if the gap becomes too large.

Thanks for your help.

aknedude

9,5 ET 35 will rub like crazy and stick 10mm out from the fender, you need ET45 at least. 8,5 et 35 will stick 5mm out in front and rub. ET 40 is max in front with 8,5. go with ET 45 to be sure.

ripratama

Thanks aknedude. Was looking at some old but nice sets of wheels like Carlsson RS and Brabus Monoblock IV. I guess I must look elsewhere. Kinda miss W202 and W203 with their tolerant setups.