Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Lighting Guides
- Mercedes-Benz C-Class: How to Install LED Headlights
Step by step instructions for do-it-yourself repairs
Browse all: Lighting Guides
new LED Projector Headlight Pair
#503
How do the headlights work when the car is running? Currently, in the daytime, the LEDs at the bottom will be lit and the headlights completely off. With these headlights, is the "C" part lit as well during the day?
#504
Super Member
Parking lights on factory halogens = "C" light on aftermarket lights.
Low beam on factory halogens = projector on aftermarket.
High beam on factory halogens = projector shutter and "cornering" lights on aftermarket.
halogen signal on factory = LED strip signal on aftermarket.
You can run with your parking lights + LED DRLs on in the daytime by switching the light switch to the correct setting.
#505
no.
Parking lights on factory halogens = "C" light on aftermarket lights.
Low beam on factory halogens = projector on aftermarket.
High beam on factory halogens = projector shutter and "cornering" lights on aftermarket.
halogen signal on factory = LED strip signal on aftermarket.
You can run with your parking lights + LED DRLs on in the daytime by switching the light switch to the correct setting.
Parking lights on factory halogens = "C" light on aftermarket lights.
Low beam on factory halogens = projector on aftermarket.
High beam on factory halogens = projector shutter and "cornering" lights on aftermarket.
halogen signal on factory = LED strip signal on aftermarket.
You can run with your parking lights + LED DRLs on in the daytime by switching the light switch to the correct setting.
#506
MBWorld Fanatic!
#507
Senior Member
I've researched everywhere and tried all settings and cannot find anway to drive with only the DRLs and the "C" shaped parking light on. Even looked on even looked on AMG C63 forums (because the chances are higher for them to have the lighting package). They have the same issue.
#510
Member
Join Date: Aug 2013
Location: Qatar/ non US
Posts: 78
Received 0 Likes
on
0 Posts
2012 C200 CGI AMG Sport,2011 SLK 200 Komprs R171 2000 Toyota Land Cruiser GXR, 2007 Jeep Wrangler JK
Does anyone know if these are the Unique Street Racing lights just resold for a higher price? If so, I got shafted ![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
http://www.ebay.ca/itm/151413907616?...84.m1497.l2649
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
http://www.ebay.ca/itm/151413907616?...84.m1497.l2649
I like the way it looks, But would like to see a review about them first.
Only one set sold out of 10 awaiting that guys feedback
#511
Senior Member
Join Date: Aug 2005
Location: Folsom Prison PA
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
04 Crossfire MB 5.0L M113 V8 6spd, 05 Bagged SRT6w/55K AMG V8 ,2016 C300 Sport
they are also double the amount of the ones offered in this thread, I do like the self leveling offered on those ebay units.
#513
Does anyone know if these are the Unique Street Racing lights just resold for a higher price? If so, I got shafted ![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
http://www.ebay.ca/itm/151413907616?...84.m1497.l2649
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
![smash](https://mbworld.org/forums/images/smilies/smashfreak.gif)
http://www.ebay.ca/itm/151413907616?...84.m1497.l2649
here the link :
http://www.aliexpress.com/item/For-2...964401884.html
sorry for my bad english
#515
#516
#517
Newbie
Join Date: Nov 2014
Location: Vancouver, Canada
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2012 C250 Coupe
If anybody in the Vancouver, Canada area are still looking to get a pair of DEPO projectors in black housing, shoot me a pm, was looking forward to do the install but traded in for another C250 with lighting package (and sports) instead.
[SOLD]
[SOLD]
Last edited by kchh90; 11-28-2014 at 03:27 PM. Reason: sold
#518
Member
Join Date: May 2012
Location: Mascouche Qc / Perth Wa
Posts: 88
Likes: 0
Received 3 Likes
on
2 Posts
C-350 2010 RWD
Has anyone ever found a way to solve the problem of the high beam sticking on the DEPO C63 like headlamps?
I have read the whole thread but it seems like the only way people found to solve this was to disconnect the mechanism which in my mind is not a fix.
I was probably one of the first to buy this set back in May I think, and I did not buy it from the same seller as everyone else.
I just sent a quick video to the seller to show him what it actually does. The gentleman said he was going to contact his distributor once he has the photos of what's going wrong. I want a new set but I wish it will have a FIX!
Here is the video I sent him on request and I am presently waiting for his response: https://www.youtube.com/watch?v=JQg-...ature=youtu.be
As you will see my left headlight stays on high beam even when it's cold or whatever I do. I could probably stick something in the socket to get is loose but that's not a fix.
Help please!
I have read the whole thread but it seems like the only way people found to solve this was to disconnect the mechanism which in my mind is not a fix.
I was probably one of the first to buy this set back in May I think, and I did not buy it from the same seller as everyone else.
I just sent a quick video to the seller to show him what it actually does. The gentleman said he was going to contact his distributor once he has the photos of what's going wrong. I want a new set but I wish it will have a FIX!
Here is the video I sent him on request and I am presently waiting for his response: https://www.youtube.com/watch?v=JQg-...ature=youtu.be
As you will see my left headlight stays on high beam even when it's cold or whatever I do. I could probably stick something in the socket to get is loose but that's not a fix.
Help please!
Last edited by toxicwaste; 11-28-2014 at 06:38 PM.
#519
Has anyone ever found a way to solve the problem of the high beam sticking on the DEPO C63 like headlamps?
I have read the whole thread but it seems like the only way people found to solve this was to disconnect the mechanism which in my mind is not a fix.
I was probably one of the first to buy this set back in May I think, and I did not buy it from the same seller as everyone else.
I just sent a quick video to the seller to show him what it actually does. The gentleman said he was going to contact his distributor once he has the photos of what's going wrong. I want a new set but I wish it will have a FIX!
Here is the video I sent him on request and I am presently waiting for his response: https://www.youtube.com/watch?v=JQg-...ature=youtu.be
As you will see my left headlight stays on high beam even when it's cold or whatever I do. I could probably stick something in the socket to get is loose but that's not a fix.
Help please!
I have read the whole thread but it seems like the only way people found to solve this was to disconnect the mechanism which in my mind is not a fix.
I was probably one of the first to buy this set back in May I think, and I did not buy it from the same seller as everyone else.
I just sent a quick video to the seller to show him what it actually does. The gentleman said he was going to contact his distributor once he has the photos of what's going wrong. I want a new set but I wish it will have a FIX!
Here is the video I sent him on request and I am presently waiting for his response: https://www.youtube.com/watch?v=JQg-...ature=youtu.be
As you will see my left headlight stays on high beam even when it's cold or whatever I do. I could probably stick something in the socket to get is loose but that's not a fix.
Help please!
#520
Member
Join Date: May 2012
Location: Mascouche Qc / Perth Wa
Posts: 88
Likes: 0
Received 3 Likes
on
2 Posts
C-350 2010 RWD
I wish there was an easy way to loosen that mechanism. I'm not going to risk to bake the headlight to open it up. If only we knew where it is stiff. I think I might remove the headlights to figure this out.
#521
Junior Member
Join Date: Sep 2014
Location: Portland, Oregon
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
2014 C300 4MATIC
Finally installed mine after having free time.
Pain in the ***. took me and a buddy about 4 hours because it was such a tight fit everywhere. Haven't tried the brights yet but everything works great so far. Cutoff was also nearly identical to my halogens on the wall, and will adjust them after driving tonight
Pain in the ***. took me and a buddy about 4 hours because it was such a tight fit everywhere. Haven't tried the brights yet but everything works great so far. Cutoff was also nearly identical to my halogens on the wall, and will adjust them after driving tonight
#522
yeah I read that. Well I only had halogen bulbs on mine, though I bought a Lumens (canadian made brand) HID kit today which I will install as soon as my headlight problem is solved.
I wish there was an easy way to loosen that mechanism. I'm not going to risk to bake the headlight to open it up. If only we knew where it is stiff. I think I might remove the headlights to figure this out.
I wish there was an easy way to loosen that mechanism. I'm not going to risk to bake the headlight to open it up. If only we knew where it is stiff. I think I might remove the headlights to figure this out.
Here is the link:
http://www.golfmk6.com/forums/showth...=66108&page=21
Last edited by polar13; 11-29-2014 at 08:32 PM.
#523
Junior Member
Join Date: Sep 2014
Location: Portland, Oregon
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
2014 C300 4MATIC
I was able to drive for a while with the new projectors.
1. Damn these things are nice. I can see so much better now, and they look fantastic
2. The brights are not halogen as another user said. The cornering lights are halogen, but the actual brights down the road are the bi-xenon
3. The cornering lights are a yellow halogen, so eventually I will change them to try to match the 6000k output
4. Zero issues with shuttering for me. I used the brights at least 30 times with no issues.
1. Damn these things are nice. I can see so much better now, and they look fantastic
2. The brights are not halogen as another user said. The cornering lights are halogen, but the actual brights down the road are the bi-xenon
3. The cornering lights are a yellow halogen, so eventually I will change them to try to match the 6000k output
4. Zero issues with shuttering for me. I used the brights at least 30 times with no issues.
#524
Member
Join Date: May 2012
Location: Mascouche Qc / Perth Wa
Posts: 88
Likes: 0
Received 3 Likes
on
2 Posts
C-350 2010 RWD
I found an easy solution to fix this problem. The only negative point is that you need to remove the headlamps from the car in order to fix them.
I will post a link to a video I made later this week when I have time. For those who have the same problem it will be a great day just like it was for me today.
Basically all you will need to do is give a little bit of free play to that shutter which is too stiff. I will try to post my link with explainations before next week-end.
Cheers!
I will post a link to a video I made later this week when I have time. For those who have the same problem it will be a great day just like it was for me today.
Basically all you will need to do is give a little bit of free play to that shutter which is too stiff. I will try to post my link with explainations before next week-end.
Cheers!