Upgraded Wheel Swap Help: Clockspring Clicks with Turn Signal
 

I upgraded to the 2012 clockspring. When the turn signal blinking, as I start to turn left I hear a click and then a second click as I complete the turn.

When I don't use the turn signal while turning the wheel there are no clicking sounds.

Is that clock spring just misaligned? No Errors

I put this info on the wheel swap thread but no one responded.

Update: Wheel alignment, No Changed
 

I got a 4-wheel alignment but there has been no change.

It's your turn signal switch mechanism teeth making contact with steering wheel.
I would re-seat the clocksping and also make sure the turn signal is seated correctly.