areuv

not all the way down on the lowest, about 1.5 full turns from the bottom, the suspension has settled and I think it's ride height is perfect for me, thanks again to Rob @ Vivid for getting this kit out to me so quicky

oliver@velosdesignwerks.com

Glad everything worked out and we were able to get this to you in time!

KEMA

So you're running 21x10.5? Would love to see some pictures.

Thanks

Ken

pgordon888

Some sharp looking dropped rides.

rleepremier

Umm I thought rob sent these to him? Did you guys send spacers or am I missing something?

pgordon888

Its not my place to get involved here.

areuv

it's a long story and I'm still waiting on spacers

areuv

that's over 1100hp sitting right there

rleepremier

Raised it up a couple weeks ago. Now it is all the way down with 21" rims. Can you say "wheel tuck"

SLee724

Hey rob, I'm having rubbing issues on the front wheels on 21's with the kw coil overs. What modifications did you make to get rid of the rubbing? The frame is right behind the plastic fender liner so I don't understand how to push the fender liner back. I only rub when I'm parking or at slow speeds. I am clearing fender with no problem though.

It seems that I'm the only person with any kind of rubbing problems on 21's. FML!

Vic55

I had issues too when I ran 21 inches for an HRE photo shoot on my CLS- the car was too low. The problem with the 21 inch set up is the rotational diameter is increased by 1 inch or 1/2 inch up top and that caused the wheel to hit the outer fender on turns. Fortunately I only had them on for a few hours and had a short drive to make for the shoot.

For me the only way to avoid the rubbing on the front plastic part of the fender would have been to raise the car a little.

Rob@vividracing

Good shot of the car lowered.

Vic55

Nice stuff Rob---- maybe I have a bad screen but the black lips tend to blend with tires creating a "big tire" look.

Do you have any close up shots to eliminate that perception?

Rob@vividracing

Yeah just cellphone pictures high resolution you can see the difference.

I have another set on the way though. Wanted to try a monoblok set and see the difference.

I love this car.

Vic55

I love the engine too--- so amazing

drop997stop

Vic,

Do you feel a major difference with the sleeves compared to your hr spring set on the e63. I am more looking at ride height and your sedan had the perfect drop. I am thinking a spring set up will be enough plus much cheaper.


Do you think your car sat lower cause you had the 350 springs

Rob@vividracing

Just got another 8 kits instock.

Please pm or email for a quote.

http://www.vividracing.com/catalog/k...-p-143880.html