Stock Springs / H&R Cup Kit Combination Question
Thread Starter
Newbie
Joined: May 2003
Posts: 6
Likes: 0
2003 Black C32
Stock Springs / H&R Cup Kit Combination Question
Hi guys i have a problem
I put on the H&R Cup Kit which lowers the front 2.0'' and the rear 1.4'', however, when i drive, my rear 19'' tires rub on the inside quarter panel nearly every time i drive over a bump in the road.
My question is:
Will H&R springs in the front and AMG stock springs in the rear of a C32 look good and work smoothly?
And if not, is there an alternative solution.
i already, bent the quarter panel inside to give the tire more clearance, and i would not like to cut the chassis.
Thanks a lot
Dave
I put on the H&R Cup Kit which lowers the front 2.0'' and the rear 1.4'', however, when i drive, my rear 19'' tires rub on the inside quarter panel nearly every time i drive over a bump in the road.
My question is:
Will H&R springs in the front and AMG stock springs in the rear of a C32 look good and work smoothly?
And if not, is there an alternative solution.
i already, bent the quarter panel inside to give the tire more clearance, and i would not like to cut the chassis.
Thanks a lot
Dave
