Beginner stumped -- how to find p/n for plug housings?
 

I'm searching EPS but the wiring connection isn't shown with the diagram my part is on.

Replacing my secondary air pump and the plug housing (I hope that's what it's called? Black plastic thing that goes holds the two wires then plugs into the pump) was brittle and broke.

How do I find a replacement? I can't seem to find a part number and obviously am not even sure what it's called. I am hoping I can get a generic one at a local auto parts store.

Thanks for any help!

Most of the time with things like this it is a home fix or you have to buy that harness. I doubt you will find just the m/f part of a plug. That being said the fuel pump lug is a GM part and available at the local auto parts store.

Thank you for the response. I was hoping there was an easier way I wasn't aware of. I managed to find enough of the pieces to actually get the p/n, but I have no idea what I'd have done without it! :D

You tried here:
https://mercedespartscenter.com/Mercedes-Benz/

Let me know if you need help with the part number. Most mercedes wiring harness connector housing female or male can be replaced separate from the harness.

Thanks so much, ya'll! I would have been lost without finding the piece of the part with the part number. I was able to run to the local dealership to pick it up for $4.

But I was seriously stumped for a bit and at a loss as to how to proceed. It was so brittle, it broke off just trying to unplug it from the pump.

Best news--Secondary air pump, fuse, and relay replaced, check engine light off!! WOO HOO!

I'll be a Car Girl someday.