19" Wheel Fitment question
19" x 8.5" ET40 all around
235/35/19 - Front tires
245/35/19 - Rear tires
Tires are staggered, but wheels are not. Will these fit w/out any rubbing issues? Will I need spacers?
I appreciate the help.
On the other hand, the rear setup will work just fine. If you're looking to go flush, I would suggest about 10mm spacers if you're going to keep on running 245/35, which has the appearance of a slight stretch.
I suggest you to run 235/35 front & rear. For 234/245 combination you might get problems with ABS/ESP.

Popey is right on the spacers and the tire size, for 8.5" rim you should be running 235/35. The profile is an aspect ratio of the width of the tire, if you run a 245/35 it will be a larger diameter than stock. This may throw off the ESP/ABS as your ECU/TCU will be expecting a certain number of rotations for the tire and it will be skewed due to the larger size diameter.
Stock offsets are 31 ET and 35 ET, you will need the spacers to prevent rubbing.
According to standard diameter a 225/35-19 would fit fine, but the weight is a little less. So 235/35 or 245/30 is better.
If the diameter is higher in front, you might get problems with stearing as well.



