Panamericana grill
I'm looking at getting a Panamericana grill for my 2019 C43 Coupe. I'm a bit concerned that the slats appear to be wide enough to allow debris in, which could damage hardware under the hood. CKS Performance tells me there is no guard that sits behind the grill. It seems to me that there should be... does anyone with experience with this grill know?




The thread: https://mbworld.org/forums/c63-c63s-...-debris-2.html
I know there are some horizontal slats that sit behind the vertical slats on the OEM Panamericana grille. Don't know what additional protection, if any, sits behind the sets of slats.
However, like RichardCranium3 said above, a lot of cars have fairly open grille designs, as there is some natural protection offered by sitting higher up than the lower front fascia openings.
Installation however...
I had this professionally done, and you are looking at several hours. Bumper, sensors, everything needs to come off. This will be the most expensive part unless you are willing to give it a go yourself. Camera needs to be properly placed if you have one, make sure sensors work before finalizing, etc.
Long job, but worth it IMO.
Installation however...
I had this professionally done, and you are looking at several hours. Bumper, sensors, everything needs to come off. This will be the most expensive part unless you are willing to give it a go yourself. Camera needs to be properly placed if you have one, make sure sensors work before finalizing, etc.
Long job, but worth it IMO.
Trending Topics
https://www.ebay.ca/itm/233247476778
I’ll take a pic of mine later today when I go out.
The Best of Mercedes & AMG
Installation however...
I had this professionally done, and you are looking at several hours. Bumper, sensors, everything needs to come off. This will be the most expensive part unless you are willing to give it a go yourself. Camera needs to be properly placed if you have one, make sure sensors work before finalizing, etc.
Long job, but worth it IMO.
'amg power is just not practical where i live' I can only assume by this statement that you live in a cave

'amg power is just not practical where i live' I can only assume by this statement that you live in a cave

Installation however...
I had this professionally done, and you are looking at several hours. Bumper, sensors, everything needs to come off. This will be the most expensive part unless you are willing to give it a go yourself. Camera needs to be properly placed if you have one, make sure sensors work before finalizing, etc.
Long job, but worth it IMO.
Anyhow...TL;DR, I ordered one off eBay that has some 3M tape to just stick it onto one of the horizontal slats. It looks alright from a distance but a little wonky and homegrown up close TBH. (Note: not shown here).
I’m generally happy with the grille otherwise — even though it was a little more of a “bulbuous” fit in my mind’s eye — but not over the moon with the AMG badge.
@jfromthenorth Did the grille you ordered come with a slot for the badge, or did you have to secure it on with double sided tape or similar? Has anyone else here managed to source a grille that’s closer to the OEM style one with the aforementioned slot and badge that plugs/clips in?
Anyhow...TL;DR, I ordered one off eBay that has some 3M tape to just stick it onto one of the horizontal slats. It looks alright from a distance but a little wonky and homegrown up close TBH. (Note: not shown here).
I’m generally happy with the grille otherwise — even though it was a little more of a “bulbuous” fit in my mind’s eye — but not over the moon with the AMG badge.
@jfromthenorth Did the grille you ordered come with a slot for the badge, or did you have to secure it on with double sided tape or similar? Has anyone else here managed to source a grille that’s closer to the OEM style one with the aforementioned slot and badge that plugs/clips in?
I have the same spec as you, but have a wagoon. What is this kind of white? Is designo diamond white bright? Or?
but imo when I see all the swaps to Panamericana I like the most the original grille.
sorry
https://www.cksperformance.com/produ...5&type=grilles
Here it is installed:
Last edited by toosteeley; Nov 18, 2020 at 02:50 PM.
https://www.cksperformance.com/produ...5&type=grilles
Here it is installed:
the star I remove from the grill and wrap it. But as I say. Dont know, how can distronic work to others who made the same as me
this is how it looks locked in the grill.
it goes very hard to turn it in the position.




