L.E.M Front Air Intakes ( FAI) *OFFICIAL DEVELOPMENT THREAD*
The following users liked this post:
AhEmGee (09-19-2021)
The following 4 users liked this post by LogosMotorworks:
09-25-2021, 03:16 AM
#32
On your website you mention a discount when bundled with charge pipes and intercooler. Where are these products for the c450 on your site and how much is that discount? Thanks.
The following users liked this post:
LogosMotorworks (09-25-2021)
09-25-2021, 05:39 PM
#33
Former Vendor of MBWorld
Thread Starter
We dont have the intercooler/ charge pipes up on the site yet. But email us and we'll send you a pic and specs :-)
if bundled: 75$ off the intercooler (intercooler kit is 1,495$). So that would be $1,420 -shipping not included.
all our W205 products are for the C400/C450/C43.
if bundled: 75$ off the intercooler (intercooler kit is 1,495$). So that would be $1,420 -shipping not included.
all our W205 products are for the C400/C450/C43.
The following users liked this post:
BoolitSpunjBoon (09-25-2021)
09-26-2021, 10:58 AM
#34
We dont have the intercooler/ charge pipes up on the site yet. But email us and we'll send you a pic and specs :-)
if bundled: 75$ off the intercooler (intercooler kit is 1,495$). So that would be $1,420 -shipping not included.
all our W205 products are for the C400/C450/C43.
if bundled: 75$ off the intercooler (intercooler kit is 1,495$). So that would be $1,420 -shipping not included.
all our W205 products are for the C400/C450/C43.
Are there instructions included for both and what is the price Shiped to my door iresponse. Also do you need any special tools for the intercooler install?Thank you for your responce.
10-16-2021, 11:53 AM
#37
My intake came in this Wednesday…getting a rattle in the sunroof looked at Monday at dealer but once I get the car back it’s going in. Will try to come back w a video for anyone curious of more testing!
The following users liked this post:
MaverickC43 (10-16-2021)
10-16-2021, 01:51 PM
#41
The following users liked this post:
MaverickC43 (10-16-2021)
10-24-2021, 02:34 PM
#46
Rattle was fixed - bless the dealer. Was honestly surprised. It was a slight creak that I didn’t expect them to fix.
intake in! Took maybe 30-45 minutes w a friend. Most of the things just took a little elbow grease to pop off after all the screws were loosened. Car sounds great, and since it’s cold currently I’m not too worried about running it without w heat shield at the moment. It’s been pouring rain here so I can’t say much about the performance nor will I get a dyno or anything for this, but car feels great. If anything changes I’ll update everyone here.
https://youtube.com/shorts/Ts9BYqfmxsk?feature=share
intake in! Took maybe 30-45 minutes w a friend. Most of the things just took a little elbow grease to pop off after all the screws were loosened. Car sounds great, and since it’s cold currently I’m not too worried about running it without w heat shield at the moment. It’s been pouring rain here so I can’t say much about the performance nor will I get a dyno or anything for this, but car feels great. If anything changes I’ll update everyone here.
https://youtube.com/shorts/Ts9BYqfmxsk?feature=share
Last edited by PiotrJCasper; 10-24-2021 at 02:40 PM.
The following users liked this post:
MaverickC43 (10-24-2021)
The following users liked this post:
PiotrJCasper (10-28-2021)
10-28-2021, 10:47 PM
#50
Junior Member
