Newbie here
12-06-2015, 11:30 PM
#1
Newbie
Thread Starter
Join Date: Dec 2015
Location: Dallas
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
2014 C63 AMG Sedan
Newbie here
Hey! I picked up a '14 C63 sedan over Thanksgiving and I am new to a Mercedes. I come from having a BMW 135i that was FBO with a Cobb tune. It's been a little over a week and I am looking ahead and starting to plan for some mods. I've seen Eurocharge Tunes and Deistic tunes, anyone better than the other? I seen the IPE exhaust and from the website it seems to be a winner as far as having the ability to control the sound, are there any other recommendations? Lastly, I have seen the ROW airbox, should I just buy the cheapest one that comes with the sensor? Any comments or recommendations are much appreciated.
Thanks,
Thanks,
12-07-2015, 12:42 AM
#3
Senior Member
Euro charged is good I recommend the tcu tune too long tube headers will give you the best gains with a tune as for ROW boxes the best bang for the buck is ones from Mercedes there is a thread somewhere on here with the correct part number. The carbon ones are really nice but expensive for minimal power gain. For tuners there are a lot of options besides eurocharged "Weistec,kleeman,OE tune, MHP ect.... I'm sure I'm missing a few. Hope that helps if you have trouble finding the row part numbers I can get them for you.
12-07-2015, 10:01 AM
#5
MBWorld Fanatic!
Join Date: Nov 2014
Location: Olathe, KS
Posts: 2,532
Received 396 Likes
on
275 Posts
'13 C63 AMG P31
Hey! I picked up a '14 C63 sedan over Thanksgiving and I am new to a Mercedes. I come from having a BMW 135i that was FBO with a Cobb tune. It's been a little over a week and I am looking ahead and starting to plan for some mods. I've seen Eurocharge Tunes and Deistic tunes, anyone better than the other? I seen the IPE exhaust and from the website it seems to be a winner as far as having the ability to control the sound, are there any other recommendations? Lastly, I have seen the ROW airbox, should I just buy the cheapest one that comes with the sensor? Any comments or recommendations are much appreciated.
Thanks,
Thanks,
Row air boxes (AFE filters are best to use). Weistec also makes the row boxes/filters but its a bit more - https://www.ecstuning.com/News/Merce...012_2013_2014/
Don't get IPE (annoying exhaust imo), if anything just find a maker that does the valvetronic cutouts, lots of members go this route.
Eurocharge is a great way to go, reliable, cost is great, easy to install.
Last edited by INS1GNIA; 12-07-2015 at 12:15 PM.
12-07-2015, 10:06 AM
#6
Senior Member
