MBWorld.org Forums

MBWorld.org Forums (https://mbworld.org/forums/)
-   C63 AMG (W204) (https://mbworld.org/forums/c63-amg-w204-93/)
-   -   **pic** how to remove stock signal sidemarker...from engine bay?? (https://mbworld.org/forums/c63-amg-w204/619516-pic-how-remove-stock-signal-sidemarker-engine-bay.html)

ELITE_KOV 03-21-2016 11:21 PM

**pic** how to remove stock signal sidemarker...from engine bay??
 
1 Attachment(s)
Hey guys....about to do this and wanna be sure I don't break anything. ...can I remove the sidemarker by pressing the white clip shown in pic? I know some threads about going through wheel area but this looks doable??

Can I remove from here and pop it out?

I don't want to break anything...I don't see screws or anything g else. Please don't mind dirty car....gonna get full spring detail soon.

Thank you fellas....

deadlyvt 03-21-2016 11:30 PM

Usually they just twist out... Lefty loosey

ELITE_KOV 03-21-2016 11:32 PM

Hi...do you mean just push it outward from inside the engine bay?

Thank you. .

INS1GNIA 03-22-2016 02:44 AM

Yep just pops right out. Pretty hard to break them.

ELITE_KOV 03-22-2016 05:08 PM

Thank you guys. Gonna tackle this tonight, I had a a few last night and didn't get careless and break stuff...

Just and push it outward from the car? The new sidemarker just pops right back in?

Im probably making this seem harder than it is, but I dont want to cause any damage .............

INS1GNIA 03-22-2016 07:03 PM


Originally Posted by ELITE_KOV (Post 6746283)
Thank you guys. Gonna tackle this tonight, I had a a few last night and didn't get careless and break stuff...

Just and push it outward from the car? The new sidemarker just pops right back in?

Im probably making this seem harder than it is, but I dont want to cause any damage .............

You will have to push a little bit at first cause its going to be wedged in there since it hasn't been removed before. But yes, just pops in and out. After you the first one, the other one should take only a min max.

sriniAMG 03-22-2016 07:35 PM

Start with the passenger side first. The driver side will be a little tricky only because there is not a lot of wiggle room compared to the passenger side.
Should pop in/out pretty easily.

ArmoE55 03-22-2016 11:20 PM

4 Attachment(s)
Just did this tonight as well... I went through the engine bay and it took me about 15 mins ... the hardest part (for me) was getting the driver side bulb in and turning right to lock it in. VERY tight area to work.

Pics below ....... car looks much cleaner with these than the sore thumb ambers!:y

ELITE_KOV 03-23-2016 07:55 AM

Wow...that looks awesome, ArmoE55. I'm assuming those are the DEPO ones from fishcake?

Smrtypants36 03-23-2016 09:13 AM

Yes. Push the clip. My was really hard to do. I had to use a flat head screw driver to loosen it.

BryanJ 03-23-2016 10:09 AM

what they said. Even though I have done practically everything to a car I still get nervous when working on my new car but it was too easy.

INS1GNIA 03-23-2016 11:27 AM

Yeah the driver side one is a pain. Once you do it that first time though, it's super easy afterwards. Looks good though :y.

ArmoE55 03-23-2016 06:03 PM

Thanks man!

Robc250 10-01-2016 12:17 AM

Where did you guys order your clear side markers? And did you swap to LEDs?

roadkillrob 10-01-2016 07:40 AM

Depo ones on ebay is what everyone gets from seller fishcake321, they are clear and come with both orange and chrome orange bulbs in them.

http://www.ebay.com/itm/DEPO-08-11-MERCEDES-W204-C300-C350-SMOKE-BUMPER-SIDE-MARKER-LIGHT-CHROME-BULB-/172347903959?vxp=mtr
Also - be aware that the on the C63 the sidemarkers did not change with the facelift, so you need 08-11 w204 side markers for the C63 all years, the non C63 changed in 12 to a different one and they won't fit.

Robc250 10-01-2016 08:52 AM


Originally Posted by roadkillrob (Post 6930368)
Also - be aware that the on the C63 the sidemarkers did not change with the facelift, so you need 08-11 w204 side markers for the C63 all years, the non C63 changed in 12 to a different one and they won't fit.

When I check compatibility on eBay it says it won't fit my '11 C250. My C is Canadian and I think it has a weird bumper on it. Anyway they look to be the exact ones I need. Here's a photo of my car showing the sidemarker. What do you think?


https://cimg3.ibsrv.net/gimg/www.mbw...6709ce5f0.jpeg

roadkillrob 10-01-2016 09:16 AM

They certainly look the same, the C250 won't be listed as the US did not have the C250 in 2011, as far as I know there are only 2 side markers on all W204's the the other one is more horizontally long and shorter, looks very different.

Robc250 10-01-2016 09:35 AM


Originally Posted by roadkillrob (Post 6930386)
They certainly look the same, the C250 won't be listed as the US did not have the C250 in 2011, as far as I know there are only 2 side markers on all W204's the the other one is more horizontally long and shorter, looks very different.

Thanks. Think I'm gunna order a set and see, looks to me like they'll fit fine.

Wish I was American tho. Free shipping and no exchange rate. You guys r lucky.

roadkillrob 10-01-2016 09:41 AM


Originally Posted by Robc250 (Post 6930396)
Thanks. Think I'm gunna order a set and see, looks to me like they'll fit fine.

Wish I was American tho. Free shipping and no exchange rate. You guys r lucky.

I grew up in Canada until I was 25 or so, US citizen also now. Was good for you the last few years when it was at par, but Canadian dollar is quite low now, was good for my summer vacation there though!!

Robc250 10-01-2016 09:46 AM


Originally Posted by roadkillrob (Post 6930400)
I grew up in Canada until I was 25 or so, US citizen also now. Was good for you the last few years when it was at par, but Canadian dollar is quite low now, was good for my summer vacation there though!!

Lucky you. Dual citizen? Best of both worlds

I'm looking at $60+ with exchange and shipping. $31 for you. 😕


All times are GMT -4. The time now is 12:21 AM.


© 2024 MH Sub I, LLC dba Internet Brands