FS: H&R Street Performance Coilovers
 

I recently purchased some KW V3s for a deal. So I'll have a set of H&R coils off the car soon with less than 1k miles on them so they are essentially still brand new with box perches and Manuel. I purchased them from Tire Rack in March 2016. Only pic I have ATM since they are still on the car. I was thinking $900 shipped within the 48 states but I am open to offers. Thank you
https://cimg7.ibsrv.net/gimg/www.mbw...d7870cf28.jpeg

how much you got your V3, and where did buy it ?

Bought them used from another member here.

Don't you mean H&R coilovers?
Never heard of H&S....

What body kit is that? Looks like you have CF side skirts?

How was the ride in all honesty??? i was interested in these...i really dont want to do springs...it has to be one pieces... so its either these or the route you just went

Yes my bad.

Extremely comfortable rode better than stock. I'm from the JDM scene where the car rides super stiff so I kinda missed that. The KW I can adjust to ride stiffer reason for the switch.

Just your generic cf lip kit everyone sells. Got all my pieces through a company in Taiwan I found on eBay.

you and me both.... i have function form type II on rsx type s... i do feel with these run flats the car rides very hard... but they well be getting switched out for hakook ventus v12 evo2 this saturday!!!

i want to drop this car so bad... but KW's say it doesnt do a very low drop which is cool i guess if i go to 19's.... but was checking the options out there and there aint many for these cars..... i might have to look into these as well... Thanks!

Reason why I bought the H&R was for the drop but my wheel offsets are too aggressive I rub constantly so i had to the raise the car a little and these KWS with stiffer settings will help with rubbing too.

im still on stocks! i want to buy wheels BUT im not sure which direction i want to go.. i really want those flares that amg 3.2 put on his car or get a black series kit... it depends on that...

what size you got and whats your specs on your wheels????

Specs are
19x9 +35
19x10.5 +47

OP, did you buy those wheels from another member here..? They look familiar, like the ADV 1 wheels a member was selling awhile back on here..

is that back the largest u can go??? as far as offset and size is concerned ???

Yes I did Haha. They look great on the car. With a little body work I can get them to fit better and get wider rubber for the rears. Don't necessarily need flares just another 1.5" of metal body work in the rear, just like how Kristin did his. Currently have 265/30. Just bought PSS in 235/30 for the front they look awesome.

10.5 is pushing it 265 is the most you'll get and not really be able to slam it. Ideally you'd want 10" with 45 offset at max.

cool...but if you add that "1.5" of metal u suggested that one should be fine right???? and thanks for all the help

Yes I will then be able to run proper fitting tires. But the bodywork involved will most likely cost more then the wheels did. I'd rather sell these wheels or trade them for less aggressive ones but I already spent money on new tires, had them repaired and repainted a liquid bronze. So might as well go all out and get the bodywork done.

I AGREE:word: the machine looks good by the way... Thanks again

PM Sent

Did you use camber plates with these?

No I did not.

Current highest offer is at $900 shipped. Thank you to those that have sent in offers.