MBWorld.org Forums

MBWorld.org Forums (https://mbworld.org/forums/)
-   C63 AMG (W204) (https://mbworld.org/forums/c63-amg-w204-93/)
-   -   FS - 2014 C63 507 Brake Rotors & Pads (https://mbworld.org/forums/c63-amg-w204/709622-fs-2014-c63-507-brake-rotors-pads.html)

toosteeley 06-03-2018 03:26 PM
FS - 2014 C63 507 Brake Rotors & Pads
 
I’ve recently upgraded my rotors/pads so my stock parts are for sale. Came off my 2014 C63 507 Edition. All parts have only 15,000 km (9,500 miles) on them. 1.5 piece front rotors (noticeably lighter then the 1 piece fronts), 1 piece rear rotors and front & rear pads with tons of meat left. Great upgrade for any non p30/p31 C63 or inexpensive alternative to brand new parts.

Asking $OLD US. Willing to work out shipping depending on location.

https://cimg3.ibsrv.net/gimg/www.mbw...9a784709d.jpeg
https://cimg4.ibsrv.net/gimg/www.mbw...b4c4b3490.jpeg

gtracer 06-03-2018 03:35 PM
Great condition!!!

SuckaGDog 06-03-2018 03:54 PM
This is how a for sale ad should be! GLWS.

What did did you upgrade to?

toosteeley 06-03-2018 03:58 PM
Thanks for the comments! Upgraded to the Racing Brake 2-piece set up.

leungsta 06-03-2018 08:41 PM
Can anyone confirm if these are the same brakes as what’s on a C63 BS?

toosteeley 06-03-2018 08:44 PM
The BS uses 390mm rotors in the front. Otherwise the same.

leungsta 06-03-2018 08:47 PM
Originally Posted by toosteeley (Post 7469655)
The BS uses 390mm rotors in the front. Otherwise the same.
Where you located ?

Mort 06-04-2018 09:45 AM
Originally Posted by leungsta (Post 7469658)


Where you located ?
According to his sig he is from Toronto.

chrisridebike8 06-05-2018 03:32 PM
Originally Posted by toosteeley (Post 7469655)
The BS uses 390mm rotors in the front. Otherwise the same.
Incorrect. Only the front calipers and all pads are the same as the BS. BS has larger rotors at all 4 corners and different calipers at the rear. Great condition for this setup though. good luck with the sale!

https://mbworld.org/forums/c63-amg-w...ml#post7139662

toosteeley 06-05-2018 03:46 PM
Good to know, thanks :)

MBNRG 06-05-2018 04:59 PM
Originally Posted by chrisridebike8 (Post 7471337)
Incorrect. Only the front calipers and all pads are the same as the BS.
BS uses slightly different Front Calipers than non-BS, with different Caliper Bracket as well ;P

chrisridebike8 06-05-2018 05:21 PM
Originally Posted by MBNRG (Post 7471434)
BS uses slightly different Front Calipers than non-BS, with different Caliper Bracket as well ;P
I think I remember that the BS caliper is externally the same. I think the pistons are a little different. And correct, the bracket is different to accomodate the larger rotor. But all you need to make a BS rotor work on a standard car is the bracket and larger wheels.

SuckaGDog 06-05-2018 05:28 PM
Originally Posted by chrisridebike8 (Post 7471454)


I think I remember that the BS caliper is externally the same. I think the pistons are a little different. And correct, the bracket is different to accomodate the larger rotor. But all you need to make a BS rotor work on a standard car is the bracket and larger wheels.
They’re actually slightly different. The bleeder valves are located inside the calipers. No external bleeders visable through the wheel face like the regular C63s. Can’t speak on the pistons as I haven’t removed mine yet. But yes, what you mentioned is all that’s needed for 390mm to work on a non BS.

But lets not derail OP’s for sale thread lol.

cm60k 06-05-2018 08:35 PM
Originally Posted by SuckaGDog (Post 7471466)

They’re actually slightly different. The bleeder valves are located inside the calipers. No external bleeders visable through the wheel face like the regular C63s.


If "C63 BS" got only one bleeder that located inside the caliper,,

that means; "C63 BS" sharing the same calipers with "W212 E63/W218 Cls63", but with (390mm) Rotors brackets..!

-;ZAYED;-

toosteeley 06-07-2018 09:37 AM
Thanks for the interest. These are now sold.


All times are GMT -4. The time now is 09:52 AM.


© 2024 MH Sub I, LLC dba Internet Brands