|
VRP M156 Throttlebody Upgrade
The VRP throttle body upgrade kit includes everything you need to adapt your 74mm throttle bodies to 82mm throttle bodies! It is a drop in modification and incredibly easy to install in your Mercedes-Benz M156 AMG. This upgrade is will drastically increase incoming air volume, resulting in a a noticeably improved throttle response and overall performance.
We saw gains of up to 12 horsepower / 8FT Lbs from upgrading to the 82mm throttle body! **Actual horsepower results may differ based on the life and health of your motor and your tune. Velocity stacks now available! Includes:
Click >> HERE << For Plates Click >> HERE << For Full Kit https://cimg3.ibsrv.net/gimg/www.mbw...efef7d532b.jpg https://cimg4.ibsrv.net/gimg/www.mbw...f301ebac9b.jpg https://cimg0.ibsrv.net/gimg/www.mbw...9be6d0a6df.jpg |
Oooh those are pretty. |
Originally Posted by BLKROKT
(Post 7491104)
Oooh those are pretty. |
What about pricing without the plate?
|
Originally Posted by mr747
(Post 7492337)
What about pricing without the plate?
throttlebodies arent very useful without the plate as they are not compatible with the stock plate. If you shoot us an email we can price you TBs only if thats what youre after. |
Originally Posted by VictoryRoadPerformance
(Post 7492459)
Check our 4th of july sale pricing thats going in now.
throttlebodies arent very useful without the plate as they are not compatible with the stock plate. If you shoot us an email we can price you TBs only if thats what youre after. |
Bump!
|
You know what would be really useful? If you guys could also come up with a bolt-on/clip-on velocity stack for the 82mm TBs themselves. A bunch of us have cobbled together solutions using glue or welds, but nobody has come up with something as OEM-like as is used on the stock TBs or the kit that RENNtech or Kleemann make.... |
We could do that with a Nylon-Carbon Fiber 3d printed part.
|
Originally Posted by VictoryRoadPerformance
(Post 7597142)
We could do that with a Nylon-Carbon Fiber 3d printed part.
I used lock Tite fearing screws would come loose. |
Thank you for the Feedback! hope you are enjoying the plate!
|
Would it be ideal to have a custom tune catered for this modification? |
Yes, a tune would provide you the largest increase in horsepower from the throttle body upgrade.
|
what would the cost be to add the velocity stacks onto a set of 85mm's ?
|
Originally Posted by Texas E63
(Post 7598298)
what would the cost be to add the velocity stacks onto a set of 85mm's ?
|
Sorry - i thought above you mentioned you might able to 3d print them ........
|
Originally Posted by Texas E63
(Post 7598357)
Sorry - i thought above you mentioned you might able to 3d print them ........
|
gotcha..... those other projects on M156's ?
|
Originally Posted by VictoryRoadPerformance
(Post 7598359)
Yes it could be done, unfortunately it is not in the works for right now as we have other projects requiring immediate completion including a supercharger conversion kit and a new carbon fiber intake.
|
This is worthless without the velocity stacks.
|
They’ll still likely work fine without the stacks. And you have plenty of options for doing stacks if you want, it’s just a little more of a project. |
I made my own stacks but would if been way better if they had something that would be plug and play.
I just snuck a video wire into my intake to see if they are still glued on and good to go so far. https://cimg2.ibsrv.net/gimg/www.mbw...4535114d91.jpg |
Originally Posted by VictoryRoadPerformance
(Post 7598359)
Yes it could be done, unfortunately it is not in the works for right now as we have other projects requiring immediate completion including a supercharger conversion kit and a new carbon fiber intake.
|
Originally Posted by Kriston
(Post 7598937)
This is worthless without the velocity stacks.
|
Originally Posted by skratch77
(Post 7599222)
Can you please post up some information about the carbon intake? That is going to be my final mod to my car lol
printing the last couple pieces now. Expect to have pics for you by tuesday or wednesday. |
| All times are GMT -4. The time now is 06:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands