MBWorld.org Forums

MBWorld.org Forums (https://mbworld.org/forums/)
-   C63/C63S AMG (https://mbworld.org/forums/c63-c63s-amg-215/)
-   -   C63s coupe 2017 - Wheel Spacers? (https://mbworld.org/forums/c63-c63s-amg/651663-c63s-coupe-2017-wheel-spacers.html)

OSJ 01-30-2017 09:12 PM

C63s coupe 2017 - Wheel Spacers?
 
https://cimg5.ibsrv.net/gimg/www.mbw...3b59cde2ad.jpg
Hello everyone,

i would like to know if someone have any recommendition for wheel spacers on the c63s coupe? Brand and which sizes should i buy front wheels and the back. I'm aiming for a look that looks clean and the tire is just a lined with the body. Any suggestions?

AutoTalent 01-31-2017 02:20 PM

Are you currently or plan on lowering the car?

OSJ 01-31-2017 02:25 PM


Originally Posted by AutoTalent (Post 7041855)
Are you currently or plan on lowering the car?

Not really ill keep it on the same hight

cmack 08-09-2017 12:03 PM

1 Attachment(s)
I have the 2017 Sedan and I am looking into getting wheel spacers as well. I think 20mm on the front and 15mm on the back..any suggestions?

Here is a site that you can order them:

http://www.otisincla.com/index.php?r...roduct_id=1620

See63esS 08-09-2017 12:51 PM

Here is 15mm all four corners not lowered. I am going to try 13MM next. These are HIGH quality spacers. Check out 42Draft Designs. Better than anything on the market. Strong, precise, light, and priced well. About $200 for all four and extended lugs.


https://cimg7.ibsrv.net/gimg/www.mbw...bad704a31b.jpg


https://cimg9.ibsrv.net/gimg/www.mbw...928b3b9582.jpg


https://cimg3.ibsrv.net/gimg/www.mbw...cda2de5438.jpg



https://cimg5.ibsrv.net/gimg/www.mbw...5f71cb46aa.jpg


https://cimg7.ibsrv.net/gimg/www.mbw...214d57b205.jpg

cmack 08-09-2017 12:53 PM

Beautiful!!!

ryanSTL 08-09-2017 06:55 PM

I've been shopping for spacers as well for my C43. I bought 15mm from ECS that are 66.6mm bore suggested for Audi/VW/Merc and they sent me the wrong Audi/VW bolts with the smaller ball.

Does anyone know if 66.6mm bore and the 66.56 mercedes bore are equivalent? I fit the spacers that I have to my car and they fit, but there is a TINY amount of give and I'm worried about vibrations.

I'm in contact with Supreme Power, waiting for a call back.

auditoamg 08-09-2017 09:56 PM


Originally Posted by ryanSTL
I've been shopping for spacers as well for my C43. I bought 15mm from ECS that are 66.6mm bore suggested for Audi/VW/Merc and they sent me the wrong Audi/VW bolts with the smaller ball.

Does anyone know if 66.6mm bore and the 66.56 mercedes bore are equivalent? I fit the spacers that I have to my car and they fit, but there is a TINY amount of give and I'm worried about vibrations.

I'm in contact with Supreme Power, waiting for a call back.

ECS did almost the same to me...
They claimed the spacers would fit and they had gap between the spacer and bore.
Yes, it will shake.
Go with Supreme or previous poster suggestion of 42DraftDesign.

SterlingE55 10-16-2017 08:07 PM


Originally Posted by auditoamg (Post 7235127)
ECS did almost the same to me...
They claimed the spacers would fit and they had gap between the spacer and bore.
Yes, it will shake.
Go with Supreme or previous poster suggestion of 42DraftDesign.

Supreme just sells H&R right?

SupremePower 10-17-2017 01:59 AM


Originally Posted by SterlingE55 (Post 7287642)
Supreme just sells H&R right?

We have done a lot of our spacers on AMG cars with success this year. We carry 15mm, 18mm, 20mm which we can run on these cars with their longer than usual hubs.

We are out of stock of our 15mm but do have H&R as a secondary option.

Our spacers sell for $125 shipped within the 48 contiguous United States.

H&R are a bit more as they do not include the extended bolts as part of their offering.

If anyone is looking for alternatives give me a shout direct on email (brian@supremepower.com) or my cell (626) 765-4013.

Happy to help!

Vic55 10-17-2017 12:52 PM

The spacer threads that keep on giving LOL......

My car on spacers (18mm square) with Supreme's house brand (better materials than H&R)- no rub all love

https://cimg0.ibsrv.net/gimg/www.mbw...8eddccd819.png
https://cimg6.ibsrv.net/gimg/www.mbw...4895aad1e6.png
https://cimg2.ibsrv.net/gimg/www.mbw...5fc9de3b92.png
https://mbworld.org/forums/attachmen...now-c63s-2.jpg

Rear wheel Top View

https://cimg1.ibsrv.net/gimg/www.mbw...0f9de4e57e.png

Front wheel

https://cimg3.ibsrv.net/gimg/www.mbw...149dd8071f.png

Jonathan Dunn 05-31-2018 02:50 PM

@Vic
 
@Vic. What company did you use to lower your car? Coil overs or just springs? What’s the drop? Did it require additional camber correction hardware or just alignment after dropping it. Looks sic. I just got my 18’ C63 S in polar white with black forged rims.

Vic55 05-31-2018 05:07 PM


Originally Posted by Jonathan Dunn (Post 7467109)
@Vic. What company did you use to lower your car? Coil overs or just springs? What’s the drop? Did it require additional camber correction hardware or just alignment after dropping it. Looks sic. I just got my 18’ C63 S in polar white with black forged rims.

I was lowered on KW HAS; I dont have the car anymore nor do I remember the actual drop amount but the front still had about 40mm left if I wanted to go further and the rear was pretty much maxed out. I didnt do any camber bolts but did do an alignment and didnt see much in tire wear as the true measurement for tire wear is toe (scrubbing) and that adjustment was more meaningful for me and my driving habits (turning).

jeremydfw 07-26-2018 12:06 AM


Originally Posted by See63esS (Post 7234519)
Here is 15mm all four corners not lowered. I am going to try 13MM next. These are HIGH quality spacers. Check out 42Draft Designs. Better than anything on the market. Strong, precise, light, and priced well. About $200 for all four and extended lugs.


https://cimg7.ibsrv.net/gimg/www.mbw...bad704a31b.jpg


https://cimg9.ibsrv.net/gimg/www.mbw...928b3b9582.jpg


https://cimg3.ibsrv.net/gimg/www.mbw...cda2de5438.jpg



https://cimg5.ibsrv.net/gimg/www.mbw...5f71cb46aa.jpg


https://cimg7.ibsrv.net/gimg/www.mbw...214d57b205.jpg

Looks great. By chance did you ever move over to the 13mm spacers?

gasman213 07-30-2018 05:27 PM

I am having aftermarket wheels put on this week so spacers will be coming off. If somebody is looking for H&R 15mm spacers with extended lugs make me an offer by PM. Fit is perfect and H&R quality.

harryTAM 11-06-2018 03:44 PM


Originally Posted by See63esS (Post 7234519)
Here is 15mm all four corners not lowered. I am going to try 13MM next. These are HIGH quality spacers. Check out 42Draft Designs. Better than anything on the market. Strong, precise, light, and priced well. About $200 for all four and extended lugs.


https://cimg7.ibsrv.net/gimg/www.mbw...bad704a31b.jpg


https://cimg9.ibsrv.net/gimg/www.mbw...928b3b9582.jpg


https://cimg3.ibsrv.net/gimg/www.mbw...cda2de5438.jpg



https://cimg5.ibsrv.net/gimg/www.mbw...5f71cb46aa.jpg


https://cimg7.ibsrv.net/gimg/www.mbw...214d57b205.jpg

I don't see they have any spacer listed on their website for MB. Do you happen to still have the part number for the spacer?

Pizz 01-05-2019 05:29 AM

Hi, read multiple forums on spacers

i have 2018 C63s couple with 19 front 20 rear GTS style wheels as my pic.

Not lowering my car car as it already scraps as I pull on/off the driveway

from what I read 15mm spacers all round should work best. Any thoughts or advice please

found a seller in the UK of HR spacers with extended bolts £150

thanks

Pizz 01-05-2019 05:45 AM

https://cimg1.ibsrv.net/gimg/www.mbw...74ba1c3f4.jpeg

NJ 1161 01-06-2019 03:41 PM


Originally Posted by Pizz (Post 7646215)

Hi Pizz, any more pics of the gts style wheels on brilliant blue? Are they Oem? Only ask as have BB and often think about swopping the 19/20 cross spokes for your wheels? They def need spacers. Im pondering 12mm all round as the pic of 15mm non lowered looks too wide in my eyes, but your rims look like 15mm would be perfect. Where are you getting them for £150?

Pizz 01-06-2019 04:50 PM

Hi

yes Original Mercedes Wheels brought from a main dealer in Germany

dont have many pictures of the wheels but can take some in the daylight tomorrow

i have had the grill and roof painted black gloss to go with the nightpack colouring and all the decals swapped out for black gloss too

just the spacers and handles left

the dpacer company was one called Bimecc in Italy but there is a company on eBay that sell them, link below

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F 263586384234

https://cimg3.ibsrv.net/gimg/www.mbw...2c5bb0d44.jpeg
https://cimg4.ibsrv.net/gimg/www.mbw...104d243f6.jpeg
https://cimg7.ibsrv.net/gimg/www.mbw...7aaf8f941.jpeg
https://cimg8.ibsrv.net/gimg/www.mbw...15fcfb1e84.png

NJ 1161 01-07-2019 02:28 PM

Cheer Pizz. Planning on doing the black roof bit myself but thinking I will get it wrapped for ease.

If looking for spacers you should try cmw wheels. They list Bimmec 15mm all round for £125/ £130 with locking bolts ( bit cheaper if go silver, instead of black) and £8 postage. Ive used them loads from an old m3 forum I was on and really good. Also list a range of sizes and h&r. I’m thinking I may pull the trigger on 12mm h&r all round inc locking bolts for £150.

https://cmwheels.com/product/mercedes-wheel-spacers/

what you you doing with the handles?

Pizz 01-07-2019 02:41 PM

I used a local Mercedes approved body shop and they took the bumper off and stripped the grill, painted it and the roof for £550 so not bad really

as for the handles I’m having them removed and taken apart to have the Chrome dipped to black chrome

there is a company called cks performance that do black covers for them (plus lots of other good stuff)

the company you mentioned is the same company as the eBay link I sent, found out today that they don’t do black bolts long enough to suit the spacers so just trying to find 50mm bolts in black to suit

NJ 1161 01-07-2019 03:35 PM

Oh yes, so it is. strange they don’t do bolts long enough?

Pizz 01-07-2019 03:46 PM

Just found 1 seller in Germany does 50,55,60mm in black so we could be back on for 15mm.

Are. You getting the 12

bevgood to see what they look like

Pizz 01-07-2019 03:51 PM

Also didn’t get chance to take anymore pictures today

only just realised how bad these pictures were of a wet dirty car. Will get some posted


All times are GMT -4. The time now is 02:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands