First and only - BAGGED C63S Sedan
#26
Banned
They dont give the option on lowering and raising how I want so in my eyes yes improvement! Definitely not gonna argue with you about my car though, you have yours and I have mine *♂️
Anyways here's some ride height pics. Still need to adjust the Struts some and would like to get a spacer made for the rear bag, but for now this works. Like I said before, probably much lower than some of you would be comfortable with.
Anyways here's some ride height pics. Still need to adjust the Struts some and would like to get a spacer made for the rear bag, but for now this works. Like I said before, probably much lower than some of you would be comfortable with.
#27
Senior Member
Thread Starter
Sure right now it looks like a cut springs civic on steelies cause it's tucking so damn hard but that's only for a few days lol
The following users liked this post:
Fordgt40 (08-31-2018)
#29
Senior Member
Thread Starter
Not where I'm at. My office is in the straight hood. Little rock is turning into Chicago like overnight. Shootings every week lol im about to take my *** to Fayetteville
#30
Out Of Control!!
Join Date: Jun 2004
Posts: 12,073
Received 2,176 Likes
on
1,528 Posts
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
Those last pics look good man! Nice work
what ride height will you do the alignment in?
what ride height will you do the alignment in?
#31
Senior Member
Thread Starter
I still need to play with it, i want to run a lower pressure in the front than I am right now so it's a bit less stiff, so I'll adjust the front strut to be about half inch longer than currently and it should be where I want it. The look of the car will completely change when the wheels get here and I get to fitting them.
I haven't touched the alignment yet, just kept wherever it was stock, I'm sure it changed some though since it's not as tall. It will be aligned at ride height and it should camber in naturally when the car comes down. I don't like running excessive camber or ridiculously stretched tires, i typically go for "racecar" fitment, wheels that fit properly and meaty tires that wont rub or mess anything up when i air it out.
#32
MBWorld God!
Join Date: Jul 2010
Location: on my way
Posts: 30,691
Received 3,419 Likes
on
2,857 Posts
2012 CLS63
Looking forward to seeing it with your aftermarket wheels, and the flushness Welcome to the forums
#33
Member
Join Date: Nov 2010
Location: Chi-town
Posts: 138
Likes: 0
Received 7 Likes
on
3 Posts
Diamond W205 C63s Ed1
Absolutely gorgeous, I have been wanting to bag my car for a while. Are you able to PM me.info about the bags you used and a dealer who supplied them? Also what kind of management are you using?
#35
Senior Member
Thread Starter
Airlift 3P, I have the 3H sensors but they're gonna take some thought on how and where to mount.
Thanks!
#36
MBWorld Fanatic!
Damn this is so sick. I really wanted to bag my car but I didn’t know anyone who was willing to make a kit. It’s gonna look great with the wheels. Killing it bro
#37
MBWorld Fanatic!
I did it because I bag all of my cars? 🤷*♂️
It looks 1000x better imo laid out when it's parked. What harm is it doing?
For me it's much more comfortable and relieving knowing I can air up the car higher than stock height if I need to... It rides better this way imo than it did on stock suspension.
I don't have any tracks near me nor have I ever tracked a car so I can't attest to the differences on a track... However there's definitely more adjustability with these over stock.
Why do you guys not like bags?
It looks 1000x better imo laid out when it's parked. What harm is it doing?
For me it's much more comfortable and relieving knowing I can air up the car higher than stock height if I need to... It rides better this way imo than it did on stock suspension.
I don't have any tracks near me nor have I ever tracked a car so I can't attest to the differences on a track... However there's definitely more adjustability with these over stock.
Why do you guys not like bags?
this 💯
#38
MBWorld Fanatic!
Some people just can't handle doing their own thing, they think the factory couldn't have done a better job and eat it up, the older guys are the ones making irrelevant posts about how we like our car with tint or suggestions on washer fluid.
Just wait till my wheels get it and it'll look alot better when it's laid out
Just wait till my wheels get it and it'll look alot better when it's laid out
#41
Senior Member
Thread Starter
Mercedes-Benz are the most qualified engineers to fit the most properly engineered wheels for this technological achievement I am fortunate enough to call my car.
#42
Senior Member
Thread Starter
Well wheels came in, need to order new tires, just threw my stocks on for now to be able to measure what I'm gonna be able to fit.
Still need some tweaking to the Struts but we almost there 😎
Still need some tweaking to the Struts but we almost there 😎
#44
Senior Member
Thread Starter
#46
Well done. Very clean looking. Most of the modded c63s' I have seen are done with black wheels and bits so it is nice to see something a little different for a change.
Now all you have to do it enjoy it
Now all you have to do it enjoy it
#49
Senior Member
Thread Starter
Thanks for all the kind words guys! I'm extremely happy with how it turned out. I typically don't ever build my car to be cookie cutter of the platform. I was tired of seeing the same car being built over and over. Being different doesn't have to be a bad thing lol.
The wheels are Rotiform LVS
Here's daytime pics I finally got it all dialed in how I want. Just waiting for tires to come in now and I'll be set!
Aired up to ride height
Aired out
The wheels are Rotiform LVS
Here's daytime pics I finally got it all dialed in how I want. Just waiting for tires to come in now and I'll be set!
Aired up to ride height
Aired out
Last edited by Mr. Pink; 09-15-2017 at 02:53 PM.
#50
Some people just can't handle doing their own thing, they think the factory couldn't have done a better job and eat it up, the older guys are the ones making irrelevant posts about how we like our car with tint or suggestions on washer fluid.
Just wait till my wheels get it and it'll look alot better when it's laid out
Just wait till my wheels get it and it'll look alot better when it's laid out