Couple Face-Lift Rear Diffuser & Tips
HI Friends,
I've seen the thread about the face-lift front grill and lower bumper parts - I have these on order. I was keen to see if anyone has tried or knows if the new rear diffuser and tips work with the pre-face lift models? If so can we have part numbers please :) Looking for the coupe specific here. Ty, Sanch |
Hi, trying to find out the same. Pretty sure the rear diffuser/ tips will be a direct swop, but need a part number of the diffuser for my merc dealer to be able to quote.
Any 2019 owners able to provide a part number. Alternatively anybody full of forum spirit and pm me a 2019 c63s vin number so I can get the part number? |
Had a look at the updated coupe, the rear should be able to fit on the same bumper.
I'm getting the VIN and ordering parts soon - Will keep everyone posted. https://cimg5.ibsrv.net/gimg/www.mbw...652306126f.jpg |
Looks Beasty! Keep us posted. Pm’d You a question.
|
It's been a pain to be able to get the part numbers for the rear.
However, after a bit of re-search I was able to find a place that sell the OEM parts for the car. Here is the link - I've ordered mine and will post once it's installed. https://global.cksperformance.com/pr...lack-or-chrome |
I actually like the C43 look better w/ the round tips. We've had a few facelift c43's in now at my work and the valance is really nice w/ the round tips
https://global.cksperformance.com/pr...body%20styling |
Originally Posted by C3504matic
(Post 7726398)
I actually like the C43 look better w/ the round tips. We've had a few facelift c43's in now at my work and the valance is really nice w/ the round tips
https://global.cksperformance.com/pr...body%20styling |
Hi Sanch- I saw CKS start advertising this recently and they are UK based, where I am. The reason I haven’t ordered from them is when I was researching edition 1 kits I found they sell Merc stuff at premium prices over just going to merc and buying it, hence I want to avoid at this stage.
Do do you have the part numbers you could post from the boxes the kit arrived in? |
Oh, and some pics of the finished article to whet our appetite also!
|
Originally Posted by untamedd
(Post 7726403)
someone with a C63 would definitely not want their car to look like a C43 :nix:
|
Originally Posted by untamedd
(Post 7726403)
someone with a C63 would definitely not want their car to look like a C43 :nix:
And for the price of this replacement facelift diffuser, you could just buy an aftermarket CF diffuser that would look much more aggressive/better. |
Originally Posted by Sanch
(Post 7726374)
It's been a pain to be able to get the part numbers for the rear.
However, after a bit of re-search I was able to find a place that sell the OEM parts for the car. Here is the link - I've ordered mine and will post once it's installed. https://global.cksperformance.com/pr...lack-or-chrome |
Anyone got part numbers yet for the diffuser and exhaust tips?
|
The install has been completed - The OEM parts will need slight modification to fit properly, but it's quite straight forward and was done by my shop.
Everything fit flush and looks epic - It is so much more aggressive now. This is what the car was missing from the rear... the pre-facelift looked a bit soft. Pics below. https://cimg7.ibsrv.net/gimg/www.mbw...b4e7277855.jpg https://cimg9.ibsrv.net/gimg/www.mbw...3f22eadc43.jpg |
Originally Posted by Sanch
(Post 7744046)
The install has been completed - The OEM parts will need slight modification to fit properly, but it's quite straight forward and was done by my shop.
Everything fit flush and looks epic - It is so much more aggressive now. This is what the car was missing from the rear... the pre-facelift looked a bit soft. Pics below. https://cimg7.ibsrv.net/gimg/www.mbw...b4e7277855.jpg https://cimg9.ibsrv.net/gimg/www.mbw...3f22eadc43.jpg |
Still waiting for one tailpipe to arrive at MB before my kit gets sent out. Can you share what mods were required to get it to fit? Thanks
|
after reading into this stuff a bit i am fairly certain this is the aero kit diffusor . looks great. i am still trying to figure out part numbers to retrofit this onto my sedan.
can anyone explain what mods were needed to get this to fit on pre facelift models? |
Originally Posted by Sanch
(Post 7744046)
The install has been completed - The OEM parts will need slight modification to fit properly, but it's quite straight forward and was done by my shop.
Everything fit flush and looks epic - It is so much more aggressive now. This is what the car was missing from the rear... the pre-facelift looked a bit soft. Pics below. https://cimg7.ibsrv.net/gimg/www.mbw...b4e7277855.jpg https://cimg9.ibsrv.net/gimg/www.mbw...3f22eadc43.jpg |
Originally Posted by Sanch
(Post 7744046)
The install has been completed - The OEM parts will need slight modification to fit properly, but it's quite straight forward and was done by my shop.
Everything fit flush and looks epic - It is so much more aggressive now. This is what the car was missing from the rear... the pre-facelift looked a bit soft. Pics below. https://cimg7.ibsrv.net/gimg/www.mbw...b4e7277855.jpg https://cimg9.ibsrv.net/gimg/www.mbw...3f22eadc43.jpg |
All times are GMT -4. The time now is 03:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands