Carbahn Autoworks (Dinan) Camber Kit - Front
#1
Member
Thread Starter
Camber Kit - Carbahn Autoworks (Dinan)
https://carbahnautoworks.com/product/front-camber-adjuster-assembly-w205-c63-c63s
For those of us considering or that have already lowered the C63, I just found another option for adjusting camber.
Granted it’s only the front but I think that’s what is most needed anyway.
A bit pricier than F1 Fabrications kit but from a reputable vendor nonetheless.
For those of us considering or that have already lowered the C63, I just found another option for adjusting camber.
Granted it’s only the front but I think that’s what is most needed anyway.
A bit pricier than F1 Fabrications kit but from a reputable vendor nonetheless.
Last edited by KAHBOOM; 06-10-2019 at 05:07 PM.
#3
Member
Thread Starter
Some additional information I thought I would share.
I just spoke to David at Carbahn Autoworks. He was very helpful in helping understand the needs for the C63 in case I lower it. They of course offer a front camber adjustment arms asmentioned. The price listed is for a core exchange. They are essentially rebuilding factory arms to be camber adjustable.
I asked about rear camber adjustment. He stated that they do not offer a rear camber arm because all that is needed is to use factory shims to produce additional positive camber. Those go in between the chassis and the factory control arm. They have the ability to source those as well. But can be obtained from the factory inexpensively.
I noticed that they also offer a coil-over kit in addition to wide range of additional upgrades for our cars. they seem to know our cars very well.
I just spoke to David at Carbahn Autoworks. He was very helpful in helping understand the needs for the C63 in case I lower it. They of course offer a front camber adjustment arms asmentioned. The price listed is for a core exchange. They are essentially rebuilding factory arms to be camber adjustable.
I asked about rear camber adjustment. He stated that they do not offer a rear camber arm because all that is needed is to use factory shims to produce additional positive camber. Those go in between the chassis and the factory control arm. They have the ability to source those as well. But can be obtained from the factory inexpensively.
I noticed that they also offer a coil-over kit in addition to wide range of additional upgrades for our cars. they seem to know our cars very well.
Last edited by KAHBOOM; 06-11-2019 at 06:46 AM.
The following users liked this post:
AV1 (06-10-2019)
#5
MBWorld Fanatic!
#6
Senior Member
Hmmm... looks like I may give this a try and get rid of my Kmac . By the time you figure out the cost to press the bushings in and the shipping its about the same ........
Trending Topics
#8
Member
Thread Starter
I don’t recall that figure exactly, but I think he mentioned a couple hundred dollars to me. I only saved the bottom dollar in my brain sorry lol.
I would call and ask for David ( their performance specialist) He is at their Mountain View location.
He was very eager to help educate me and answer my questions.
I plan to go this route once I buy my springs in a few weeks.
I would call and ask for David ( their performance specialist) He is at their Mountain View location.
He was very eager to help educate me and answer my questions.
I plan to go this route once I buy my springs in a few weeks.
Last edited by KAHBOOM; 06-11-2019 at 06:45 AM.
#9
Member
Thread Starter
Another update regarding Carbahn Camber Adjustable arms.
I spoke with the rep who said that they are no longer doing the core exchange. They have 2 options:
1) Sell new arms with ball joints $1400.00 ish
2) You send your control arms to them and they will pack them with ball joints and make them camber adjustable. $799
Now I am a bit undecided on this option. Nevertheless it appears to be the best current option functionally.
I spoke with the rep who said that they are no longer doing the core exchange. They have 2 options:
1) Sell new arms with ball joints $1400.00 ish
2) You send your control arms to them and they will pack them with ball joints and make them camber adjustable. $799
Now I am a bit undecided on this option. Nevertheless it appears to be the best current option functionally.
#10
MBWorld Fanatic!
Join Date: Nov 2016
Location: Toronto, ON
Posts: 1,527
Received 283 Likes
on
194 Posts
2021 Mercedes C63s AMG Coupe
Another update regarding Carbahn Camber Adjustable arms.
I spoke with the rep who said that they are no longer doing the core exchange. They have 2 options:
1) Sell new arms with ball joints $1400.00 ish
2) You send your control arms to them and they will pack them with ball joints and make them camber adjustable. $799
Now I am a bit undecided on this option. Nevertheless it appears to be the best current option functionally.
I spoke with the rep who said that they are no longer doing the core exchange. They have 2 options:
1) Sell new arms with ball joints $1400.00 ish
2) You send your control arms to them and they will pack them with ball joints and make them camber adjustable. $799
Now I am a bit undecided on this option. Nevertheless it appears to be the best current option functionally.