New HID kit Group Deal Pricing....no need for dealer Xenon setting!!!
When I bought my kit (from another retailer) it cost me $350, was made and packaged by Hella and came in a choice of ANY of the 3 light colors they sell.
They included a single piece transformer/ballast, bulbs, and even a full relay set if I wanted to go the illigitemate way of installation (without having dealer turn it on).
This is why I have a beef with folks like H4l after all, their prices are 2x what the marketplace is going for yet the product is certainly not 2x as good. I don't understand what's so difficult about asking a dealer to turn on the HID function. To me it's worth $300 clams. That's half of an AMG brake kit!
P
Sorry, I didn't mean to offend - I know that HIDs 4 less invented that nonsense term. My beef is with them.
When I bought my kit (from another retailer) it cost me $350, was made and packaged by Hella and came in a choice of ANY of the 3 light colors they sell.
They included a single piece transformer/ballast, bulbs, and even a full relay set if I wanted to go the illigitemate way of installation (without having dealer turn it on).
This is why I have a beef with folks like H4l after all, their prices are 2x what the marketplace is going for yet the product is certainly not 2x as good. I don't understand what's so difficult about asking a dealer to turn on the HID function. To me it's worth $300 clams. That's half of an AMG brake kit!
P
Where'd you buy your kit from? Got pics
?
sorry. I've seen this kit sold in many different places, however, here is a place that sells it for $459...
http://shop.store.yahoo.com/speedrac...cokitxeli.html
I've seen it on ebay for as low as $300, and again with the group buy I was on for just over $350.
I've since sold my coupe, but still have the kit parts - two ballasts, two bulbs. If anyone wants them PM, me I'd like to get $275 for it if I could.
Thanks
P
Same scenario as the LED bulbs we toyed with a while back.
So some of you might want to think on that for a while and come up with your own solution - or, stick large a$$ resistor making more heat in your engine compartment.
P
The Best of Mercedes & AMG

On a side note, for several reasons:
Group deal is off
Please don't ask me why, I have my own reasons. I suggest you contact them directly or have someone take over the group deal.
Thanks,
Erik

Are you dropping out of the group buy because we are trying to find the best deal?
1. Its not my product
2. I am not making 1 penny off of the deal.
3. I have mine already, and I don't need a second set.
I was doing this becuase I was asked to by several members when I went to be the test car, but since i am not getting anything out of it I have no reason to put up with all this BS. So, in that case I have better things to do with my time then deal with something that will not effect me. All I am getting or will get is headaches...
See the original post where I became the test car...I really have nothing to do with the company or the product, so leave me alone about everything related to it! No more e-mails please!
https://mbworld.org/forums/showthrea...&highlight=hid
Erik

Look forward to W203 Sedan and Coupe White Faced gauges in the next several weeks!
Erik
I am droping it for other reasons...honestly, I don't know what your guys problem is anyway...I said from the begining:
1. Its not my product
2. I am not making 1 penny off of the deal.
3. I have mine already, and I don't need a second set.
I was doing this becuase I was asked to by several members when I went to be the test car, but since i am not getting anything out of it I have no reason to put up with all this BS. So, in that case I have better things to do with my time then deal with something that will not effect me. All I am getting or will get is headaches...
Erik

TP

Dayum man. I hope your panties didnt get in too much of a twist. People want to find out the best deal a out there, and know what they are getting. You got alot of emails, and headaches out of the whole ordeal, well welcome to being the leader of a group buy my friend. When you step up to the plate and become a leader of something like that, you open the door to the emails and headaches. Maybe the people on the forum will not want to put up with your BS and the white faced gauges. Don't be so quick to bite the hand that feeds you.

TP
Several people on the board have hids4less hids and nobody said one word, I bring you the same price hids they normally sell, but upgraded to work for the mbs and people still complain...honestly I don't care...go elsewhere, it doesn't effect me one bit.
The mistake i made was to try and set something up for a product i did not make and for something that i wasn't going to benefit by doing....so I have 0 motivation, and the more people yelled at me, the more I felt I don't need to deal with it.
So...for the people that thought it was overpriced...now its even more overpriced...
for the people that wanted them, I am real sorry, but i suggest you try and set something up yourselves since you guys will be the ones to actually see something out of it.
Next time people should really read and listen when I say its not my product/pricing/etc and I would have been more then happy to set it up...but I will not put up with those kind of e-mails and not get anything out of it...
Erik

Sorry things didn't work out. Keep us posted on the gauges.
This is not directed towards you...but...
People, please STOP e-mailing me. I cannot lower the price, I cannot explain how to modify your HID system, I am a common idiot when it comes to electrical devices. Seriously, I cannot stress this enough. Even after the above 4 or 5 posts I am still getting e-mail.
Again, to recap for our slower friends:
1. I am no longer doing this group deal.
2. I do not make the products.
3. I don't know how to modify a stock HID kit
4. E-mail or call hids4less for pricing and purchasing
5. I cannot change the price, I have no influence
Thank you in advance,
Erik
Here's my experience.... If you use the Hella balasts there is no need for resistors or a DAS setting mod. I've installed the kit with Hella blasts, from AutoToys.com in 2 benzes that have a DAS setting for xenons. Both worked without having to make a DAS setting change. I think the kit was only around $450...
i thought it was odd too, cause other members were saying that i would still have to go to the dealer to set the xenon to present.
I am a common idiot
Honestly, anyone who gave him sh*t about this product are either idiots, a$$holes, or both. I don't understand at all why you'd do that to someone who's simply informing people about a product that's not even theirs.
Grow up, please.
Here's my experience.... If you use the Hella balasts there is no need for resistors or a DAS setting mod. I've installed the kit with Hella blasts, from AutoToys.com in 2 benzes that have a DAS setting for xenons. Both worked without having to make a DAS setting change. I think the kit was only around $450...

This is most likely because the Factory Bi-Xenons on my MY03 are Hella Xenon lights. I would assume that MB uses all Hella Xenon's at least in the C-Class, maybe the whole line-up, so then the DAS recognizes them and that would be why they work so well.
Erik
Yeah but on a stock Xenon, the DAS must still be enabled...
Erik



