MBWorld.org Forums

MBWorld.org Forums (https://mbworld.org/forums/)
-   CLK-Class (W209) (https://mbworld.org/forums/clk-class-w209-43/)
-   -   Convertible top won't go down (https://mbworld.org/forums/clk-class-w209/349874-convertible-top-wont-go-down.html)

tinnette 05-06-2010 12:20 PM

Convertible top won't go down
 
My husband owns a 2004 500 CLK with 18,000 miles. Unfortunately, I have never paid much attention to the workings of his car. He passed away this last fall. I am unable to open the convertible top. I get an error message " close partion skibag" I have pulled the owner's manual out several times, but I am unable to figure out what I need to do to correct the problem. I have an apt scheduled with the dealer, but the car doesn't need its A service for another 5400 miles. If it is a fairly easy fix, I would like to not spend the money.

Thanks for any help,

Mary

CarLK500 05-06-2010 01:05 PM

Page 273 of the [2006 my] owners manual. There is a partition thingy in the trunk that needs to be closed and a luggage cover that needs to be closed to get the top to go down. it's not a problem, but unless you see it done maybe you won't get it.

henry47 05-06-2010 03:50 PM

CarLK500 is correct, if you open the trunk, there will be a horizontal plastic piece right on the ceiling of the trunk. it runs all the way from the left to right and you'll have to pull this piece closer to you.

eddieo45 05-06-2010 06:35 PM

you're welcome Mary; sorry to hear about your husband's passing. God Bless.

tinnette 05-06-2010 07:54 PM

:bow:Thank you for the help. I got the partion back in place!! You saved me an expensive visit to the Benz dealer. The owner's manual kept throwing me off course. The manual shows a pull strap that I needed to pull to adjust the plastic bar. My bar doesn't have a strap. Now I can put the top down and drive it around. I need to drive it around since the battery has discharged twice on me already!!

Thanks again,

Mary

Klinh 05-06-2010 08:24 PM


Originally Posted by tinnette (Post 4063254)
The manual shows a pull strap that I needed to pull to adjust the plastic bar. My bar doesn't have a strap.

Thanks again,

Mary



The only time you ever need to pull those straps is when the top does not work due to electronic/mechanical problems and you need the top up. There's a straps but it hidden inside the plastic cover. You really need to read the user's manual of how to cloce the top manually in case your top stop working when it rain.

eddieo45 05-06-2010 08:58 PM

Come again, anytime.

thibp 04-10-2011 03:58 PM

how to close clk 350 trunk partition

Sheryl's350 06-08-2011 11:47 PM

Need a lil HELP please!
 
Hi there...ok, so I recently purchased a 2006 CLK350 Convertible and the first thing I did was check the manual on soft top operation. So the tops been going down and up as it should. However, I placed a piece of small luggage in the trunk (Top was up) and now when I try to put the top down, I am receiving an error message that reads: "Please Close Trunk Partition" and the top will not go down now. But I never touched the trunk partition and not quite too sure where this is located to close...any ideas and/or pics I can see as to where it's located and what I need to do to close this darn thing. Thank you for your help :thankyou:

henry47 06-09-2011 12:34 AM


Originally Posted by Sheryl's350 (Post 4710063)
Hi there...ok, so I recently purchased a 2006 CLK350 Convertible and the first thing I did was check the manual on soft top operation. So the tops been going down and up as it should. However, I placed a piece of small luggage in the trunk (Top was up) and now when I try to put the top down, I am receiving an error message that reads: "Please Close Trunk Partition" and the top will not go down now. But I never touched the trunk partition and not quite too sure where this is located to close...any ideas and/or pics I can see as to where it's located and what I need to do to close this darn thing. Thank you for your help :thankyou:



pop open your trunk.

when the trunk is open, look at the "ceiling" of the storage compartment. There will be a rounded piece of plastic. what likely happened was that your piece of luggage hit this partition and moved it forward.

you need to grab the bottom of the rounded piece of plastic and pull it towards you as close as you can. as soon as there's resistance, the partition has been set. give it a try and report back

Yidney 06-09-2011 03:56 PM


Originally Posted by Sheryl's350 (Post 4710063)
Hi there...ok, so I recently purchased a 2006 CLK350 Convertible and the first thing I did was check the manual on soft top operation. So the tops been going down and up as it should. However, I placed a piece of small luggage in the trunk (Top was up) and now when I try to put the top down, I am receiving an error message that reads: "Please Close Trunk Partition" and the top will not go down now. But I never touched the trunk partition and not quite too sure where this is located to close...any ideas and/or pics I can see as to where it's located and what I need to do to close this darn thing. Thank you for your help :thankyou:

It's a gray piece of plastic about three feet wide and 5 inches tall. In the center it has place to stick your fingers like a grab handle. It has to be pulled back when you operate the top because the top occupies part of the trunk when it's down. When you put your package in you pushed it part way forward. When you are not using the top you can push it all the way forward to give you more trunk space - it's made for just that purpose. It has to be pulled all the way back to operate the top because it presses a switch on the far left side that tells the car it's ok to put the top down. When you pushed it forward you disengaged that switch.

Sheryl's350 06-12-2011 12:47 AM


Originally Posted by henry47 (Post 4710132)
pop open your trunk.

when the trunk is open, look at the "ceiling" of the storage compartment. There will be a rounded piece of plastic. what likely happened was that your piece of luggage hit this partition and moved it forward.

you need to grab the bottom of the rounded piece of plastic and pull it towards you as close as you can. as soon as there's resistance, the partition has been set. give it a try and report back


Thank you Henry as that worked...my top goes down now. Thank you again for your help, much appreciated.

Sheryl's350 06-12-2011 12:48 AM


Originally Posted by Yidney (Post 4711013)
It's a gray piece of plastic about three feet wide and 5 inches tall. In the center it has place to stick your fingers like a grab handle. It has to be pulled back when you operate the top because the top occupies part of the trunk when it's down. When you put your package in you pushed it part way forward. When you are not using the top you can push it all the way forward to give you more trunk space - it's made for just that purpose. It has to be pulled all the way back to operate the top because it presses a switch on the far left side that tells the car it's ok to put the top down. When you pushed it forward you disengaged that switch.


Thank you Yidney, your description details of instruction worked...my top goes down now. Thank you again for your help, much appreciated.

daryenne 06-22-2011 05:30 PM

Can the trunk partition break?
 
HI - I was reading everyone's resposes regarding the trunk partition. I got the same error message this morning, andwhen I went to pull the plastic piece towards me (as I do almost eevry time I want the top down) it will not stay in that position. It just flops back to it's original position, sort of folded upward. Can anyone offer me any explanation as to why this happend and if it's an easy fix, or will it be costly? The top worked fine yesterday. Any advice or suggestions or explanations would be helpful and welcome! Thank you!

DangermouseCLK 07-11-2011 08:34 AM

Similar problem here.

Had the car a couple of months and the "partition" has always been down, allowing for soft top operation.

Pushed it up out of the way a couple of days ago, for a larger package, and when I pulled it down, I get the "Please Close Trunk Partition" message.

A little investigating and I find that there is a limit switch on the left hand side (drivers side) that this partition is supposed to hit. When I pull the partition into place, I can hear the switch make, but when I let go, the partition moves slightly forward, just off the switch, and I hear the switch click again.

I suspect the problem is the two little gas struts that hold the partition in place have just gotten weak and can no longer provide the pressure needed. They look to be difficult to get to.

Anyone replaced these before? Are they available on parts.com?

(in the interim, I used a bungie cord to keep the partition in place, and the switch made. Top works fine now, but probably not a M-B approved repair :) )

daryenne 07-11-2011 03:17 PM

Gas struts
 
Dangermouse- I just had to replace the gas struts because I was having the same problem as you. (look for thread "trunk partition" on this site")
I ended up purchasing mine from a local MB dealer - paid around $45 each, and was lucky enough to have a friend who was able to replace them for me. If you read the thread I mentioned above, Russ White posted that he replaced his for much less money, by ordering the parts online. He also provides the website and part number.
Apparently these things go bad rather quickly. Since mine have been replaced, I haven't had any truouble whatsoever - in the past I would have to pull the partition towards me each time I wanted to put the top down. Not so anymore.
Good luck!

Davideo 07-11-2011 04:47 PM

I also have an '04 cab, and I had the same problem with the microswitch on the left side. At first I used gaff tape to keep the switch open, but have solved it permanently by drilling a hole in the plastic and installing a cotter-pin type thing in there - keeping the limit switch always on. I just have to be sure that the partition is pulled down!

And to the person who said their battery is dying - if it's an original 04' battery, it's time for a new one!

DangermouseCLK 07-11-2011 05:10 PM


Originally Posted by daryenne (Post 4751106)
Dangermouse- I just had to replace the gas struts because I was having the same problem as you. (look for thread "trunk partition" on this site")
I ended up purchasing mine from a local MB dealer - paid around $45 each, and was lucky enough to have a friend who was able to replace them for me. If you read the thread I mentioned above, Russ White posted that he replaced his for much less money, by ordering the parts online. He also provides the website and part number.
Apparently these things go bad rather quickly. Since mine have been replaced, I haven't had any truouble whatsoever - in the past I would have to pull the partition towards me each time I wanted to put the top down. Not so anymore.
Good luck!

Thanks.

Don't know how I missed that thread the first time :confused:

jwynkoop2424 07-12-2011 05:30 PM

Replacing partition struts
 
I have replace the small struts for the truck partition. If you can use a rope or bungie cord to hold the parition down to get the top to operate you can replace them yourself. I actually used a piece of luggage and wedged the partitian open against the luggage.

Once the top begins to operate and open, the back glass lifts up and then the back cover lifts up. While both the back glass is up and the back cover is also up, release the button that operates the top.

At this point, walk back there and you should be able to look down in the hole between the back glass and back cover and see the small struts. They pop off and the new ones should snap into place.

Good luck

marian122559 08-17-2012 12:28 PM

I replaced the gas struts and still get the close partition signal. Does anyone know what else could be wrong? Thanks

Yidney 08-17-2012 12:36 PM


Originally Posted by marian122559 (Post 5324389)
I replaced the gas struts and still get the close partition signal. Does anyone know what else could be wrong? Thanks

The next logical thing is the switch. It's located on the lower left of the frame as you are standing facing the trunk - driver's side. You can see how the partition is supposed to press on it. Press it with your finger and listen for an audible click. Tape it in the closed position to "fool" the car and see if the top works. It may be bad, broken, or just out of position.

EDIT: Or your partion my need some adjusrment and is not pressing the switch properly.

DangermouseCLK 08-17-2012 12:59 PM

When I replaced my struts I had the same problem initially.

After investigation, I discovered that the strut was just a little too short and was not making the switch. I confirmed this by pulling on the partition while listening for the switch to click.

The strut has a little adjustment on it. Take it out and un-thread the socket at one end a couple of turns. Re-install. You may need to try it a couple of times. I would only un-thread it the minimum amount to make the switch work.

marian122559 08-17-2012 01:01 PM

Thank you. Do you know where I can get a switch or do I need to buy it at the dealership?

marian122559 08-17-2012 01:21 PM

Thank you Dangermouse. I think that is my problem, because I just checked and my switch is making the clicking sound..

marian122559 08-17-2012 01:42 PM

Dangermouse you saved me $250 bucks. I owe you one!


All times are GMT -4. The time now is 03:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands