![]() |
KevBlah's Quad Exhaust Thread
After talking about it for several months, I have finally completed my custom quad exhaust conversion on my 07 CLK550.
What I did was put back the stock bubble resonators that I had previously removed, install a Magnaflow X-Pipe, and then from there out to quad tips. There is no muffler, so it produces a fairly loud and deep exhaust note, with a nice growl from the V8. The labor was a bit more than I expected in terms of cost, but it came out nearly perfect. I'm not sure if I am totally satisfied with the tips, they still don't look OEM to me, for some reason. However, they did paint most of the piping black to give it a clean look. As you can see, it's snowing right now, so I can't really take it out and throttle down, so you'll all have to wait for a better exhaust clip. Quad AMG Tips - $200 Magnaflow X-Pipe (10791) - $70 DIY Bumper Cutout - Free Labor + Custom Piping - $530 Total Job Cost: $800 Cold Start: :bow: http://www.youtube.com/watch?v=Z3VOx...layer_embedded :bow: Warm Start: :bow: http://www.youtube.com/watch?v=lz0XAfm_0AY :bow: AMG Tips http://img156.imageshack.us/img156/4743/img1074e.jpg Magnaflow X-Pipe http://img820.imageshack.us/img820/2158/img1077bo.jpg Resonators + X-Pipe http://img28.imageshack.us/img28/4733/img10911.jpg Passenger Side Piping http://img543.imageshack.us/img543/3563/img10931.jpg Finished Product http://img141.imageshack.us/img141/9752/img1096v.jpg http://img714.imageshack.us/img714/4425/img1098md.jpg |
i think old style was very good. something wrong now for me. maybe pipes are too long??
|
That thing sounds mean! How's the drone on the highway? I do see what you're saying about the tips. Judging from the pic above, they aren't centered in the bumper hole. Also they stick out a bit. Almost like mine. I'm trying to make some time to go and get them pushed in. That sound is awesome!
|
Originally Posted by dynomite05
(Post 4467257)
That thing sounds mean! How's the drone on the highway? I do see what you're saying about the tips. Judging from the pic above, they aren't centered in the bumper hole. Also they stick out a bit. Almost like mine. I'm trying to make some time to go and get them pushed in. That sound is awesome!
As far as sticking out too much, I think they're okay...not sure. Haven't taken it out on the road yet, just got it cleaned yesterday and it's snowing now, so it's sitting in a garage. |
by the way really sound is amazing
|
Originally Posted by kevblah
(Post 4467260)
I think you may be right, the driver's side tips are definitely not centered. The passenger side ones seem to look all right, though. I added another picture of the rear from a different angle, they look fine in that pic.
As far as sticking out too much, I think they're okay...not sure. Haven't taken it out on the road yet, just got it cleaned yesterday and it's snowing now, so it's sitting in a garage. I see what you're saying now with the second pic. It looks like the drivers side is hanging a bit lower than the passenger. Mine too..lol |
Very nice, adds the perfect touch to the clk's rear end. Love the exhaust tone, so much better than stock.
Best $800 to spend on clk! |
Maybe you need to raise the exhaust tips a little more?
|
It would be killing me if I couldn't drive the car after an exhaust mod. That motor sounds great, I know you must be anxious.
|
Originally Posted by dynomite05
(Post 4468175)
It would be killing me if I couldn't drive the car after an exhaust mod. That motor sounds great, I know you must be anxious.
|
your is very similar to mine sounds.
Andy |
sounds great but as brought up the tips are off and need to be adjusted...
|
exhaust hangers need to be adjusted, its hanging way too low. Drivers side may need to be rewelded to be better centered. Mandrel bent pipe would have been better, but if you are just going for sound that's probably irrelevant anyways.
that definitely won't be a sleeper exhaust that's for sure :) |
Sounds mean
|
Nice work so far Kev, a few tweeks and it'll be great. Sounds like a beast.
|
I like the sound ! +1
|
Whew sounds amazing!... Just raise it up a bit and it'll be just as aesthetically pleasing too...
Couple questions...what size piping is our stock piping?...also did you just run your piping under our stock sway and around the spare wheel well?...there was enough room?... Thanks and keep it up... Angelo |
do you have white leds on the license plate?
|
Originally Posted by Newjd2
(Post 4469018)
Couple questions...what size piping is our stock piping?...also did you just run your piping under our stock sway and around the spare wheel well?...there was enough room?...
Originally Posted by Nando87
(Post 4469122)
do you have white leds on the license plate?
|
Update: Added a new video with more revving.
|
That sounds crazy! I hat revving it in park, feels like the car has no power. lol
|
Wow man thats a beast. I cant wait for a drive by video i know it will sound way better than that.
Congrats. What camera are you using there? |
Originally Posted by Clkboi
(Post 4469951)
Wow man thats a beast. I cant wait for a drive by video i know it will sound way better than that.
Congrats. What camera are you using there? |
Oh good to know i never though the quality of the camera would be that nice on this phone.
I gotta make a new drive by video too when the weather cleans up a little.Though Friday its gonna be sh*** again. |
Is it me or there is no muffler at all!
|
| All times are GMT -4. The time now is 03:43 PM. |
© 2026 MH Sub I, LLC dba Internet Brands